Hifiverse

Kopfhörerverstärker - Connected-Fidelity Charisma XHP-7

Beschreibung, Bilder, technische Daten und Spezifikationen

Connected-Fidelity Charisma XHP-7
Bildquelle - (c) Connected-Fidelity

The Charisma XHP-7 is a headphone amplifier that Concert Fidelity calls its headphone monitoring reference amplifier, listed as the Audiophile reference of the Charisma XHP Series. Concert Fidelity was started in 1987 by Masataka Tsuda, who designs and builds all of the products at the company workshop in Nagano prefecture, Japan. The XHP-7 is made in Japan, and no list price is published.

Key specs that matter

Inputs are four line-level RCA inputs, and input 4 also has an XLR connector. Input impedance is 100 kohms on RCA and 50 kohms on XLR. Two individual headphone amplifiers are installed, each with its own output level control and mute. Outputs 1 and 2 each have a 6.35 mm TRS jack and a balanced 4-pin XLR, or alternatively a pair of 3-pin XLR connectors for left and right. Operation is class AB in a BTL amplifier design. Recommended load impedance is 6-600 ohms. Dimensions are 450 x 100 x 310 mm (W x H x D), and net weight is 8.5 kg.

Engineering and use context

Concert Fidelity states that the output section is customisable to user specifications. On the 4-pin XLR, pin 1 is L+, pin 2 is L-, pin 3 is R+ and pin 4 is R-. Its 3-pin XLR-L and XLR-R connectors can be wired unbalanced or balanced.

Mains versions are available for 100 V (50/60 Hz), 110-120 V (60 Hz), 220-230 V (50 Hz) and 240 V (50 Hz). Each unit uses a transformer dedicated to the destination country, operation at other voltages is not guaranteed, and failures outside the destination country are not covered by the warranty. Its chassis has the same 450 x 100 x 310 mm format as the CF-080LSX4 line stage, the DAC-040Mk2 converter and the CDV-2 crossover of the Reference Series.

Pairing

Up to four line-level sources connect directly, one of them balanced through the XLR on input 4. Headphones of 6-600 ohms are within the recommended range. Balanced drive requires a headphone cable with a 4-pin XLR plug or with separate 3-pin XLR plugs for left and right.

Alternatives

The Charisma XHP-5 is the battery-powered Concert Fidelity headphone amplifier with one RCA input and a single headphone amplifier.

Spezifikationen

  • Modellbezeichnung

    Charisma XHP-7

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    450 x 100 x 310

  • Gewicht (kg)

    8.5

  • Offizieller Link