Hifiverse

Kopfhörerverstärker - Nuprime Audio AMG HPA

Beschreibung, Bilder, technische Daten und Spezifikationen

Nuprime Audio AMG HPA
Bildquelle - (c) Nuprime Audio

The AMG HPA is a fully balanced headphone amplifier and line preamplifier from NuPrime Audio, part of the AMG series that also includes the AMG PRA preamplifier and the AMG STA power amplifier. NuPrime calls it the first headphone amplifier with a 1 MOhm input impedance, a design first used in its EVO ONE amplifiers. The list price on the NuPrime site is USD 1,999.

Key specs that matter

Balanced headphone output power is 3,500 mW into 32 ohms and 300 mW into 600 ohms, from a 4.4 mm socket and a 4-pin XLR. The 6.3 mm jack gives 2,000 mW into 32 ohms and 150 mW into 600 ohms. Headphones down to 8 ohms can be driven. Input impedance is 1 MOhm from 10 Hz to 200 kHz on both the balanced and the line inputs. Frequency response is 20 Hz - 200 kHz (-3 dB), THD+N is 0.05%, S/N ratio is above 100 dB, dynamic range is above 80 dB and crosstalk attenuation is at least 80 dB at 1 kHz. Inputs are one balanced XLR pair and three stereo RCA pairs, and line outputs are one RCA pair and one XLR pair. Size is 55 x 235 x 300 mm (H x W x D) and weight is 2.5 kg.

Engineering and use context

Its input stage uses ultra-high-bandwidth, low-noise JFETs for the 1 MOhm input circuitry. Amplification is by a single-ended class A module with no negative feedback. Input, volume, amplification and power output stages are independent circuits, and the whole amplifier is fully balanced. Two MUSES72320 chips form the volume control, with 100 fully balanced steps from 0 to 99.

Inside, the power supply has a custom R-core transformer and 26,000 µF of filter capacitance. With the XLR and RCA line outputs in use, the AMG HPA works as a reference level preamplifier with 1 MOhm inputs. A selector switch sets the mains voltage to 90 - 130 V AC or 210 - 250 V AC, and the fuse is a slow-blow T2A type. NuPrime supplies it in grey with a two-year warranty, in a 120 x 450 x 320 mm package weighing 5 kg.

Pairing

A source with balanced XLR outputs connects to the XLR input, and up to three single-ended sources connect to the RCA inputs. Headphones with a 4.4 mm or 4-pin XLR balanced plug use the higher-power outputs. The matching power amplifier in the series is the AMG STA, connected to the XLR or RCA line outputs.

Alternatives

The NuPrime HPA-9, now discontinued, is an earlier pure class A headphone amplifier and preamplifier with a JFET input stage and a phono input.

Spezifikationen

  • Modellbezeichnung

    AMG HPA

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    3500

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    300

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    200 000

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    0.05

  • Signal-Rausch-Abstand (dB)

    >100

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    80

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    55 x 235 x 300

  • Gewicht (kg)

    2.5

  • Offizieller Link