The AIC10Bal is a stereo integrated headphone amplifier from Riviera Audio Laboratories of Italy, whose circuits are designed by Luca Chiomenti. An internal DAC and any controls Riviera judged superfluous were deliberately left out of the design.
Key specs that matter
Output power is 10 W + 10 W into 8 ohms in pure Class A. Gain is 26.5 dB, input sensitivity is 135 mV for 1 W/8 ohms and 440 mV for 10 W/8 ohms, and input impedance is 47 kohms. Sources connect through one balanced XLR line input and two RCA line inputs. Headphones plug into a 6.3 mm jack or a 4-pin XLR socket, and loudspeaker outputs are provided as well. Dimensions are 26 x 43.5 cm with a height of 14.5 cm, and weight is 14.4 kg.
Engineering and use context
Like every Riviera amplifier, the AIC10Bal uses zero overall feedback, a hybrid circuit and pure Class A operation. Voltage amplification in each channel is by a triode operating in Class A, and the tube complement is one ECC82/12AU7. Solid-state devices make up the power section and can dissipate 150 W continuously. Its linear power supply has an oversized transformer, a pi filter and distributed capacitance totalling more than 65,000 uF, with many small capacitors placed close to the power devices instead of two large reservoirs. Riviera stabilises the tube section supply with a MOSFET and uses a pi filter on the power stage supply too. There are no active protection circuits, only safety fuses on the supplies. Two finishes are offered, Gold with 24 kt gold knobs and Dark Titanium in matte grey with matte aluminium controls.
Pairing
A front-panel selector sets SPEAKERS, HP-HIGH for low-sensitivity headphones or HP-LOW for high-sensitivity headphones. Riviera specifies the speaker outputs for medium-sensitivity loudspeakers in domestic rooms. The XLR input accepts a balanced DAC or preamplifier.
Alternatives
Riviera Audio Laboratories has no other headphone amplifier in its current range.