Hifiverse

Netzfilter und HiFi-Möbel - Gold Note PSX-5.2

Beschreibung, Bilder, technische Daten und Spezifikationen

Gold Note PSX-5.2
Bildquelle - (c) Gold Note

The PSX-5.2 is an external power supply from Gold Note of Florence, designed specifically for the components of the company's Series 5.2. Gold Note describes it as an evolution of the PSU-5, with changes to the mechanical structure, the power supply itself and the range of units it can serve. UK pricing was GBP 700, with a European price of EUR 720.

Key specs that matter

Inside are a 4-rail audio-grade power supply and two ultra-low-noise voltage regulators. Maximum output voltage variation is 0.05%. Line noise rejection and common-mode noise rejection are both above 80 dB, and full power response time is below 2.5 µs. Mains input is 100 - 120 V or 220 - 240 V with auto sense, 50/60 Hz. Power consumption is 40 W, dynamic power is above 60 W and standby power is below 1 W, with a 2 A T fuse. The unit measures 200 x 80 x 260 mm (W x H x D) and weighs 2 kg net, 3 kg boxed. Its finish is black anodised aluminium.

Engineering and use context

Gold Note names its filtering Super Inductive Dual Choke hybrid technology, and states that the new black anodised aluminium chassis reduces interaction with magnetic fields. Compared with the PSU-5, the supply is more stable and delivers higher current. With its dual-output layout, a phono stage and a line-level source stay connected permanently. The upper PSU Out connector is dedicated to the PH-5 and PH-5.2 phono stages, and the lower one takes the CD-5, CD-5.2, DS-5.2 or HP-5.2. Only one unit is powered at a time, so the full energy reserve goes to the selected component, and changing over means switching the first unit off and the second on.

On the rear panel are the two PSU outputs, an IEC socket, a master switch, a GND post and a Ground/Lift switch. In the GROUND position the ground connection stays active, while LIFT disconnects the signal ground to break ground loops, and the GND post can be tied to the powered unit's GND post against EMI or RFI. In Master-Slave Mode the PSX-5.2 follows the connected Gold Note unit into operation or standby. A front status LED is red in standby and green when on. The box contains the PSX-5.2, a mains cable, two PSU cables and the user manual.

Pairing

A Gold Note Series 5.2 component or the PH-5 is required.

Alternatives

Gold Note's PSU-5 is the earlier external power supply that the PSX-5.2 evolves from.

Spezifikationen