The QNET7 is a seven-port network switch in the QRT range of Nordost, the company better known for its cables. Nordost announced it in May 2025 at a suggested US retail price of USD 5,499.99 and launched it officially in August 2025 as the successor to the five-port QNET. It is made in the USA and carries a 24-month warranty for the original purchaser.
Key specs that matter
Type is a layer 2 unmanaged switch with 7 ports. Ports 1-5 are 1000BASE-T/100BASE-TX with auto-negotiation and auto-MDI/MDI-X support. Port 6 is 100BASE-TX with auto-negotiation and auto-MDI/MDI-X support. Port 7 is an SFP port for 1000BASE-T and 1000BASE-X (LX/SX) modules. Connectors are 6x 8P8C (RJ45) and 1x SFP. DC power input is 5 V/1 A. Dimensions are 320 x 122 x 59.25 mm with feet, and weight is 1.65 kg.
Engineering and use context
According to Nordost, the QNET7 is designed from the ground up for high-end audio instead of being an improved consumer-level switch. Inside are nine independent, ultra-low-noise power supplies intended to minimise cross-contamination between circuits. On port 6, the layer 1 and layer 2 functions are separated into dedicated circuits for further noise control, and Nordost reserves this port for the streamer or server/DAC downstream of the switch. The router and generic network devices such as NAS drives go on ports 1-5.
Port 7 takes external SFP transceivers, so it works either as an extra RJ45 port or as an optical port with multi-mode or single-mode fibre. Nordost recommends identical modules at both ends of a fibre link. SFP+ modules are not supported, and copper modules have to be fixed 1 Gbps 1000BASE-T types. Nordost publishes a list of modules tested with the QNET7.
Each port has LED indicators. Ports 1-5 flash green at 1 Gbps and orange at 100 Mbps, while the SFP port lights steady blue once a link is established. There is no power switch, and the unit stays operational while power is connected. It accepts 5 to 9 V, and its supplied DC power supply is not interchangeable with the one of the original QNET.
Pairing
The supplied power supply can be replaced by the Nordost QSOURCE, with output A set to 9 V and the QNET7 QSOURCE DC Cable. Its matching support is the QRT Stand Mount with Sort Kones. The SFP port accepts a fibre link from the router.
Alternatives
The Nordost QNET is the earlier five-port layer 2 switch in the QRT range.