The PS-1250 is a Clean Power Supply from Accuphase of Japan, an AC power source for audio components that shapes the mains waveform against an internal reference. Dating from 2023, it is the sixth generation of the series that began with the PS-1200 in 1997 and succeeds the PS-1230. The unit is made in 230 V and 120 V versions.
Key specs that matter
Rated output capacity is 900 VA (continuous). Rated output voltage is AC 230 V ±3.0 V at a rated output current of 3.9 A, and output frequency is 50 or 60 Hz, identical to the input frequency. Output waveform THD is 0.08% or less. Rated input voltage is AC 230 V ±10%. No-load power consumption is 55 W, and cooling is natural air cooling. Eight AC output terminals are on the rear panel. Dimensions are 465 x 243 x 499 mm (W x H x D) and net weight is 41.3 kg.
Engineering and use context
To build its reference waveform, the PS-1250 detects the zero-cross point of the mains and generates a square wave. This square wave passes through a two-stage band pass filter and a six-stage band elimination filter to give a reference free from harmonics, and the reference signal is transmitted in balanced form. A waveform correction amplifier compares the input with the reference, supplements what is missing and removes the excess. Accuphase quotes third-order harmonics reduced from -40 dB to -80 dB.
Noise elimination has three stages - a line filter for noise from digital devices, a shielded toroidal power transformer against common mode noise, and the waveform correction amplifier. Shaping is done as pure AC with no conversion to DC, and no oscillators are used.
The internal layout is symmetrical, as in Accuphase stereo power amplifiers. A large shielded toroidal transformer and two 48,000 µF/100 V filtering capacitors sit at the centre, with a power amplifier block on each side. Each block has a 10-parallel bipolar transistor output stage, together a 20-parallel push-pull output stage driven fully in parallel, and its inputs are balanced. All internal output wires are of equal length. Protection circuitry covers temperature, DC-AC detection, current detection and inrush.
A colour liquid crystal display shows output power in VA (0-1,200 VA), input and output voltage, input and output distortion (0-6%), efficiency and the input and output waveforms, and it can be switched off. The front panel is champagne-coloured, with high-gloss aluminium side panels.
Pairing
Accuphase states that the VA value of audio equipment is generally 1.2-1.8 times its rating in watts. Connected units together have to stay below 900 VA at maximum volume. It is not intended for industrial equipment or household appliances.
Alternatives
The Accuphase PS-550 is the smaller Clean Power Supply in the current range.