Hifiverse

Sonstige Geräte - Network Acoustics Origin

Beschreibung, Bilder, technische Daten und Spezifikationen

Network Acoustics Origin
Bildquelle - (c) Network Acoustics

The Origin is a streaming power supply from Network Acoustics, the British company best known for its eno Ethernet filters. Network Acoustics began as a lockdown project of Richard Trussell, an electronics engineer and former IT professional, and Rob Osbourn, a former publisher, filmmaker and DJ. The company describes the Origin as a hybrid DC power supply designed exclusively for digital devices used to stream music, including routers, switches, DDCs, optical converters, streamers and DACs. It is hand-engineered in the UK and lists at GBP 2,079.17 excluding VAT.

Key specs that matter

Two output versions are offered, 5 V and 12 V, each with a 2.1 mm or 2.5 mm DC barrel connector of 5.5 mm outer diameter. Maximum power capacity is 3.0 A for the 12 V version and 3.5 A for the 5 V version, and the DC output has no current-limiting fuse. On the rear panel are the DC output, a fused IEC mains input with switch, an earthing post and a green LED. Dimensions are 180 x 218 x 58 mm and weight is 1.7 kg. Operating conditions are +5 to +35 °C at less than 80% relative humidity. Finishes are black and silver, and the warranty is two years.

Engineering and use context

According to Richard Trussell, switched-mode technology surpassed linear and battery options in the company's listening tests, and the Origin therefore uses a switched-mode design with a 4-stage filtering process from AC input to DC output. Its mains input stage has dedicated filtering against mains-borne interference. Mundorf Mcap Supreme EVO Silver/Gold capacitors are used in the output stage, and the internal wiring is solid-core high-purity silver/copper alloy.

A fully shielded aluminium enclosure houses the circuit and also acts as its heatsink. The earthing post is mechanically connected to the enclosure and wired directly to the earth of the IEC connector, and therefore to mains earth. In the barrel connector the centre pin is positive and the outer part negative. Supplied with the unit are the Network Acoustics Reference DC Power Cable at 1.00 m length, DC barrel connector adapters and a mains power cable for the region. The DC cable locks with a push-in connector and releases by its knurled outer ring.

Pairing

The connected device must run from 5 V or 12 V DC and draw no more than the rated current. Clocks are also listed among the compatible devices. Within the brand the Origin is part of the Network Acoustics system of noise-rejecting products, alongside the eno filters.

Alternatives

Network Acoustics has no other power supply in its range.

Spezifikationen