The NW-WM1AM3 is the aluminium-bodied model in the WM1 family of Sony's Signature Series, placed below the copper NW-WM1ZM3 and above the NW-ZX900. Sony announced all three Android players on 16 October 2026. The WM1AM3 succeeds the NW-WM1AM2, reaches Japanese stores on 27 November at an estimated JPY 347,000 and was offered for pre-order in the US at USD 2,999.99.
Key specs that matter
Into 16 ohm in High Gain, JEITA-rated output is 250 mW + 250 mW from the 4.4 mm balanced jack and 60 mW + 60 mW from the 3.5 mm stereo jack, with a frequency response of 20 Hz to 40 kHz on both. Native DSD playback reaches 11.2 MHz through the balanced output, while the unbalanced jack receives DSD converted to PCM. Of the 128 GB of built-in memory about 91 GB is free for music, and storage can be expanded by microSD card. The 5.5-inch touchscreen has a 1920 x 1080 resolution. Wi-Fi and Bluetooth 5.4 are built in, with SBC, AAC, LDAC, aptX, aptX HD, aptX Adaptive and LC3 for wireless headphones. Battery life is up to about 35 hours with 128 kbps MP3 and about 33 hours with 96 kHz/24-bit FLAC in Sony's music app. The player measures 86 x 157.6 x 23.2 mm and weighs about 425 g, compared with roughly 299 g for the WM1AM2.
Engineering and use context
A milled aluminium alloy frame carries a gold-plated oxygen-free copper rear chassis, and both the circuit board and the rear panel are fixed directly to the main chassis to lower resistance and keep grounding stable. A milled OFC block shields the digital section. The power supply uses two large solid polymer capacitors and an ultra-low-noise LDO regulator, with hand-soldered OFC wiring and custom FT CAP3 parts. A 4N copper coil sits in the balanced output filter, and the clock comes from two low phase noise crystal oscillators. The 10-layer low-dielectric board is assembled with gold-containing solder. Amplification is handled by S-Master HX, now with a look-ahead noise shaper.
Pairing
Headphones and IEMs fitted with a 4.4 mm cable get the higher output and native DSD, so the balanced socket is the better choice for harder-to-drive models. PCM files can be converted to DSD by the DSD Remastering Engine, and DSEE Ultimate upscales compressed tracks, including streamed ones. In USB DAC mode the WM1AM3 can also act as an external converter for a computer.
Alternatives
Above it in the same series, the NW-WM1ZM3 uses a gold-plated oxygen-free copper main chassis, Kimber Kable internal wiring and 256 GB of storage.