Hifiverse

Sonstige Geräte - Schiit Audio GUNNR

Beschreibung, Bilder, technische Daten und Spezifikationen

Schiit Audio GUNNR
Bildquelle - (c) Schiit Audio

Gunnr is a gaming DAC and headphone amplifier from Schiit Audio, the American company founded in 2010 by Jason Stoddard and Mike Moffat. It arrived in October 2024 as a complete re-thinking of the Hel and combines two analogue front-panel controls with a microphone input and the option of running from a single USB-C cable. Price is USD 214.

Key specs that matter

Output power is 2000 mW RMS per channel into 16 ohms, 1500 mW into 32 ohms, 800 mW into 50 ohms and 200 mW into 300 ohms. Frequency response is 20 Hz - 20 kHz (±0.2 dB). THD is below 0.0004% (20 Hz - 20 kHz, 2 V RMS), IMD below 0.0006% (CCIR), and SNR above 114 dB (A-weighted, ref. 2 V RMS). Crosstalk is better than -75 dB. Output impedance is 0.25 ohms at the headphone jack and 75 ohms at the line out. Gain is Negative, Low or High, with maximum outputs of 0.67 V, 2 V and 8.5 V RMS on the wall adapter. Conversion uses an ESS ES9018 DAC with an LM4562 I/V stage and an OPA1654 filter stage, behind a C-Media CM6635 USB receiver with custom firmware. USB accepts 16/44.1 to 32/384, the optical input 16/44.1 to 24/192, and the microphone input runs at 48 kHz. Size is 127 x 89 x 35 mm including the knob, and weight is about 0.45 kg.

Engineering and use context

Both front controls are analogue and work on any source. Turning the Width knob to the left blends the two channels, and the second knob raises or lowers the range the ear is most sensitive to. The output stage uses TI OPA1656 devices, four amplifier stages per channel. For the microphone there is a dedicated TI ADC with an NE5532 preamp. USB playback is driverless on Windows 10 and 11, Mac, Linux and Android in UAC 2, and switches automatically to UAC 1 for PS4, PS5 and Switch.

On USB power alone the Gunnr runs from internal ±5 V rails at no more than 500 mA, and maximum output drops by 10 dB. The supplied wall adapter activates the Linear Override supply with ±15 V rails and about 4 W consumption, and the unit then draws no current from USB. It can also be ordered without the adapter. Schiit uses a Neutrik headphone jack and a custom high-match Alps potentiometer, and adds over-current protection, thermal protection and ESD hardening of all inputs and outputs. Plugging in headphones mutes the line out on the back panel. Chassis are made in California, the boards in California or Nevada, and final assembly is in Corpus Christi, Texas.

Pairing

Negative gain is the setting for sensitive in-ear monitors. Powered speakers connect to the rear line out. Hosts are PC, Mac, PS4, PS5, Switch, iOS and Android devices.

Alternatives

Schiit's Fulla is a smaller USB DAC and headphone amplifier for the desktop.

Spezifikationen