The AVAA C214 is a digitally controlled active bass absorber from PSI Audio, the Swiss studio monitor maker that belongs to Relec SA of Yverdon-les-Bains. AVAA stands for active velocity acoustic absorber, and the C214 is the digital successor to the analogue AVAA C20 of 2017, which PSI Audio presented as the first commercially available active bass trap for small rooms. The C214 sells for EUR 3,500 or USD 3,950 and comes in a white or a black finish.
Key specs that matter
The unit is a cylinder 63.5 cm long and 21.5 cm in diameter, housed in cast aluminium. Inside sit a microphone, signal processing on two independent DSPs, an amplifier stage and two 140 mm drivers, so the work is shared by two smaller membranes rather than one large cone. PSI Audio specifies a working band of 15 Hz to 160 Hz and claims an absorbing surface up to 45 times the physical size of the tube, equal to roughly 35 times its volume in passive absorbent material. Processing latency is given as 0.2 ms. Power draw is about 3.3 VA when the room is quiet and rarely exceeds 4 VA in normal use, and the mains connection is an IEC C14 inlet with an on/off switch at the back.
Engineering and use context
The C214 needs no input signal, electrical or acoustic, and runs no calibration routine. It emits no signal of its own and only absorbs. Membrane excursion is fed back into the amplifier, and the unit retunes itself continuously while it runs. Because it acts on sound pressure, it is placed close to reflective boundaries or in corners, where pressure peaks, and floor, wall and ceiling positions are all possible. An optional bracket allows wall mounting or horizontal placement, and a separate foot costs USD 395 per unit in black only. The technology is covered by patent EP 3 225 038 B1, assigned to Relec SA. Status LEDs sit on the front and the back.
Pairing
The absorber works alongside any loudspeaker system, from studio monitors to a home cinema or a stereo pair, because it never connects to the audio chain. PSI Audio recommends at least two units per room for symmetry, and a pair covers rooms of 20 to 80 m2, while bigger spaces need more units. Control runs over Wi-Fi on the 2.4 GHz band after pairing through a QR code on the back panel. The app for iOS and Android switches each unit or group on and off, changes level and processing status, and the maker plans firmware updates through it, though the app is optional for daily use.
Alternatives
The PSI Audio AVAA C20 is the earlier analogue active bass trap of the brand, designed for small studio control rooms.