Hifiverse

Sonstige Geräte - Allnic Audio AUT-8000

Beschreibung, Bilder, technische Daten und Spezifikationen

Allnic Audio AUT-8000
Bildquelle - (c) Allnic Audio

The Allnic Audio AUT-8000 is a moving-coil step-up transformer, a passive box that raises the low output of an MC cartridge to a level a moving magnet phono input can work with. Kang Su Park designs it in South Korea, and the transformers are wound by hand at the Allnic factory. It took the place of the AUT-2000 in the range, carries a US price of USD 4,800 and comes in matte black or silver.

Key specs that matter

Two pairs of RCA sockets accept two MC cartridges, and a single pair of RCA outputs feeds the phono stage, with a screw terminal for the tonearm ground lead. Gain is set in four steps of 22, 26, 28 and 32 dB. A separate selector offers loads of 10, 20, 30 and 47 kohm for the cartridge. Allnic quotes total harmonic distortion below 0.025% at 1 kHz. The case measures 320 mm wide, 110 mm high and 210 mm deep, and the unit weighs 3.81 kg.

Engineering and use context

The windings are pure silver wire on permalloy cores, the same silver-wound transformer type that Allnic fits inside its H-8000 DHT phono preamplifier, whereas the outgoing AUT-2000 used copper wire. Most step-up devices place several primary taps on the transformer and route them to a switch mounted elsewhere in the case. In the AUT-8000 the transformer and its gain selector form one integrated block, and that block sits in a mu-metal shielding can so that stray magnetic fields from nearby equipment do not reach the tiny cartridge signal. The front panel carries a large gain knob for each channel and a smaller central knob for the load setting, so left and right can be set independently. Allnic machines the aluminium housing on CNC equipment, and this housing accounts for about 2 kg of the total. No mains supply is involved, so the box needs no power cable and no switch-on time.

Pairing

The AUT-8000 is meant to sit between the turntable and any phono stage that has a moving magnet input, from any maker. Low-output MC cartridges with low internal impedance call for the higher gain positions, while models with more output can use the lower ones and avoid overloading the phono stage. With two inputs, one turntable fitted with two arms, or two separate decks, can stay connected at once. Since both gain and load are changed with front-panel knobs, a newly fitted cartridge can be matched without tools or opening the case.

Alternatives

The Allnic Audio AUT-2000 is the earlier MC step-up transformer from the brand, built with copper windings instead of silver.

Spezifikationen

  • Modellbezeichnung

    AUT-8000

  • Highlights

    THD (Total Harmonic Distortion): Less than 0.025% at 1 kHz, +20 dB Gain, Inputs: MC (Moving Coil) unbalanced (RCA) × 2 pairs, Outputs: Unbalanced (RCA) × 1 pair, Ground: Screw Type x 1

  • Abmessungen (mm)

    320 x 110 x 210

  • Gewicht (g)

    3810

  • Offizieller Link