Hifiverse

Kabel - Allnic Audio ZL-5000 Speaker Cable

Beschreibung, Bilder, technische Daten und Spezifikationen

Allnic Audio ZL-5000 Speaker Cable
Bildquelle - (c) Allnic Audio

The ZL-5000 is a speaker cable from Allnic Audio of Korea, part of the Zero Loss range designed by Kang Su Park. Allnic names its power cords and loudspeaker cables ZL-3000 and ZL-5000 after this Zero Loss approach, and the ZL-5000 speaker version sat above the ZL-3000 in price. In 2019 a three-metre pair cost USD 3,800, with each extra 0.5 m adding USD 300.

Key specs that matter

The ZL-5000 uses oxygen-free copper conductors with silicone and PVC insulation under a braided outer sleeve. Each end carries the patented high-tension spade, a double-blade design whose tines are bent back toward the rear of the connector so that they act as a spring against the amplifier or speaker post. The blade is titanium with rhodium plating.

Engineering and use context

Zero Loss, in Allnic's description, targets three separate causes of signal loss in a cable - linkage, contact and wire resistance. For linkage, the conductors and spades are joined by hot-melt welding at 1,000 °C instead of solder or screw-down housings. For contact, the sprung blade presses on a larger area of the terminal, and Allnic heat-treats the parts so that the pressure holds over time. For wire resistance, conductor thickness was chosen for each run. Compared with the ZL-3000, the ZL-5000 moves to a heavier gauge of copper.

Pairing

Spade terminals limit the ZL-5000 to binding posts that accept forks, so speakers or amplifiers with banana-only sockets need a different cable.

Alternatives

The ZL-8000S is the Allnic speaker cable that replaces copper with silver conductors.

Spezifikationen

  • Modellbezeichnung

    ZL-5000 Speaker Cable

  • Kabeltyp

    Speaker Cable

  • Isolierung

    Silicon, PVC

  • Aufbau

    N/A

  • Leiter

    OFC

  • Material

    N/A

  • Kapazität (pF/f)

    N/A

  • Induktivität (μH/ft)

    N/A

  • Anschlussstecker

    Patented high-tension, Rothium-coated titanium spade

  • Abmessungen (mm)

    2500

  • Offizieller Link