Hifiverse

Kabel - Burson Audio Cable+ Pro 2RCA-2RCA

Beschreibung, Bilder, technische Daten und Spezifikationen

Burson Audio Cable+ Pro 2RCA-2RCA
Bildquelle - (c) Burson Audio

The Cable+ Pro 2RCA-2RCA is an active stereo interconnect from Burson Audio of Melbourne, Australia, with a buffer circuit built into the cable. Burson announced it in spring 2017 for a launch on 15 May 2017, about ten years after its original Burson Buffer, at a list price of USD 199 and a pre-launch price of USD 149. Its purpose is impedance matching - according to Burson, source output and amplifier input are usually mismatched unless all components come from one maker and one product line, and the buffer is intended to remove that mismatch.

Key specs that matter

Length of the RCA-to-RCA version is 1.2 m, and weight is about 200 g. Input impedance is 250 kohms and output impedance is 3 ohms. Frequency response is 0 Hz - 55 kHz (±1 dB), THD is below 0.005%, and signal-to-noise ratio is above 118 dB at 6 dB gain. Power dissipation is 5 W, and consumption is 1 VA over USB. Besides the 2RCA-2RCA layout, the range also included a version with a 3.5 mm AUX plug at the input and an AUX-to-AUX version.

Engineering and use context

A brushed aluminium housing holds a fully discrete buffer based on Burson's own discrete op-amp technology, with no integrated circuit in the signal path of the module. Conductors and plugs are made by Canare of Japan. Being an active circuit, the cable passes no signal without power. A micro USB socket on the side of the housing takes 5 V, and the package includes the cable, a USB power lead and a USB power supply. Burson sold the Cable+ Pro with a 30-day satisfaction guarantee and a full refund.

Pairing

Burson describes the buffer as an isolation stage between a source, such as a CD, DVD or media player, and the next amplification stage - a preamplifier, integrated amplifier or active loudspeakers. It replaces a standard RCA interconnect between two components with single-ended connections. A USB port or mains outlet is required near the housing. According to Burson, the circuit also raises the output of portable devices to standard line level, mainly relevant to the AUX-input versions.

Alternatives

Burson Audio also offered a passive RCA interconnect of the same Canare construction without the buffer module, listed at USD 69 per stereo pair.

Spezifikationen

  • Modellbezeichnung

    Cable+ Pro 2RCA-2RCA

  • Kabeltyp

    Interconnector

  • Isolierung

    N/A

  • Aufbau

    N/A

  • Leiter

    N/A

  • Material

    N/A

  • Kapazität (pF/f)

    N/A

  • Induktivität (μH/ft)

    N/A

  • Anschlussstecker

    N/A

  • Abmessungen (mm)

    1200

  • Offizieller Link