Hifiverse

Vorverstärker - Gryphon Audio ZENA

Beschreibung, Bilder, technische Daten und Spezifikationen

Gryphon Audio ZENA
Bildquelle - (c) Gryphon Audio

The Zena is a dual mono line preamplifier which Gryphon Audio Designs builds in Denmark as the replacement for the Athena. Where the Athena used a ball-bearing volume control, the Zena adopts touch-sensitive buttons on a dimmable graphical vacuum fluorescent panel, and it was the first Gryphon preamplifier to accept an optional phono stage or DAC module either when bought or at a later date.

Key specs that matter

At the back, two balanced inputs use gold-plated Swiss Neutrik XLR sockets, while three single-ended inputs use gold-plated, Teflon-insulated RCA sockets, with outputs on a single XLR pair and two RCA pairs. Maximum gain is +18 dB. Input impedance is 50 kOhm balanced and 25 kOhm single-ended over 20 Hz to 20 kHz. Output impedance is 15 ohm on XLR and 22.5 ohm on RCA. Bandwidth runs from 0.1 Hz to 1 MHz at -3 dB, THD+N is below 0.005%, and the power supply holds 2 x 26,000 uF.

Engineering and use context

The circuit is zero-feedback, true dual mono, fully discrete, DC-coupled and Class A, with a high-speed discrete single-ended Class A input buffer. Signal stays fully balanced, with no conversion to single-ended before attenuation. Its microprocessor-driven relay attenuator offers 43 volume steps of 2 dB each, with no more than two resistors in its signal path at any time. The attenuator uses ultra-precise SMD metal-foil resistors and hermetically sealed, gold-plated Pickering reed relays, and local shunt regulators give the supply an ultra-low output impedance. Tone controls, balance knobs, polarity inversion and a headphone output were left out for a shorter signal path, and internal wiring is minimal. Input level matching is available in the menu. The optional DAC module accepts PCM and DSD through USB, AES, optical and a pair of S/PDIF inputs, handling up to 384 kHz PCM and DSD512, and the optional phono module supports MM and MC cartridges. A minimalist aluminium remote with a built-in stand is supplied, and the unit carries EU CE approval.

Pairing

Green Bias works with Gryphon power amplifiers to control their Class A output dynamically. AV throughput can be assigned to input 2 on XLR or input 3 on RCA for a surround processor, and a 12 V DC link input and output let the Zena power up and down in step with linked components.

Alternatives

The Gryphon Essence Preamplifier is another Gryphon line preamplifier with a 43-step relay attenuator and optional phono and DAC modules.

Spezifikationen

  • Modellbezeichnung

    ZENA

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    2 + 1 (Phono)

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    18

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    50 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    25 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    < 0,005

  • Abmessungen (mm)

    480 x 169 x 400

  • Gewicht (kg)

    12.1

  • Offizieller Link