Hifiverse

Vorverstärker - Einstein Audio Components The Preamp

Beschreibung, Bilder, technische Daten und Spezifikationen

Einstein Audio Components The Preamp
Bildquelle - (c) Einstein Audio Components

The Preamp is a fully balanced, dual-mono tube line preamplifier from Einstein Audio Components of Bochum and belongs to the company's Reference Series. Einstein's May 2023 price list names the current version The Preamp MK18, at EUR 35,000. The same series includes The Poweramp, a balanced Circlotron hybrid power amplifier, and The Silver Bullet MKII tube OTL mono power amplifier.

Key specs that matter

Output voltage is 2.5 V balanced into 100 ohms, and output impedance is 50 ohms. Maximum input voltage is 7 V. Bandwidth is 7 Hz - 400 kHz, channel separation is > 98 dB, distortion is < 0.01% (1 kHz) and signal-to-noise ratio is approximately 100 dB. There is no global feedback. Dimensions are 200 x 430 x 410 mm (H x W x D), and weight is 20 kg.

Engineering and use context

Einstein uses a two-stage amplifier concept with point-to-point wiring. An input and symmetry amplifier forms the first stage and converts the input signal into a balanced signal in a single discrete stage. Ten tubes are used in the input stage, selected and paired, and a dedicated circuit at the input tubes is intended to extend tube life. In the second stage there is no voltage gain. It is an impedance converter with high current capacity, fully balanced and double mono, with four selected NOS EI PCC88 double triodes per channel. According to Einstein, the bandwidth of this output stage extends into the MHz range.

Source selection works without switches, relays, FETs or ICs. Each input has its own input tubes for the left and right channel, and an input is selected by switching the heaters of those tubes on or off. Volume is set by a circuit that also operates outside the signal path. Input sensitivity is variable, again outside the signal path, and can be used to set levels in a bi-amped system.

Both amplifier channels are isolated from the housing and mounted on separate low-resonance sub-frames against microphonics. For this version Einstein designed a larger, mechanically more stable enclosure that is resonance-optimised and thermally improved, and the lower internal temperature reduces inherent noise. Its power supply was completely redesigned, with stabilised supply voltages and wide-band decoupling.

Pairing

Outputs are balanced. The matching power amplifier is The Poweramp. Einstein's matching interconnect is The Silver Surfer NF cable.

Alternatives

Einstein Audio Components has no other line preamplifier in its range.

Spezifikationen

  • Modellbezeichnung

    The Preamp

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    N/A

  • Analogausgänge (symmetrisch)

    N/A

  • Analogausgänge (unsymmetrisch)

    N/A

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    2.5

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    50

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    50

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    < 0.01

  • Abmessungen (mm)

    200 x 430 x 410

  • Gewicht (kg)

    20

  • Offizieller Link