Hifiverse

Vorverstärker - Perreaux SM6 MkII

Beschreibung, Bilder, technische Daten und Spezifikationen

Perreaux SM6 MkII
Bildquelle - (c) Perreaux

The SM6 MkII is the balanced stereo preamplifier of the Prisma Series from Perreaux, a New Zealand company in Mosgiel near Dunedin that started production in 1974. Perreaux describes it as a fully balanced, discrete, solid-state Class A preamplifier for analogue sources and as a match for its 350 and 750 power amplifiers. Pricing was NZD 9,495 in New Zealand and GBP 4,500 in the UK. Finishes are black or silver anodised, or custom painted.

Key specs that matter

Rated output is 1.5 V RMS unbalanced and ±1.5 V RMS balanced, and maximum output is 3.3 V RMS unbalanced or 6.8 V RMS balanced. THD+N is typically 0.001% at 1 kHz and <0.004% from 20 Hz - 20 kHz. Frequency response is 20 Hz - 20 kHz (±0.15 dB). Signal-to-noise ratio is 95 dB, referenced to rated output, and dynamic range is 110 dB. Channel separation is 95 dB at 1 kHz unbalanced and 105 dB at 1 kHz balanced. Input impedance is 10 kohms unbalanced and 20 kohms balanced, with an input sensitivity of 215 mV and input overload at 3.9 V RMS or 7.8 V RMS. It measures 430 x 106 x 323 mm (W x H x D) and weighs 7.7 kg.

Engineering and use context

The SM6 MkII is fully balanced, and the positive and negative halves of the signal never touch. Four discrete Class A line stages provide output buffering for driving low-impedance loads over long cable lengths. Six separate power supplies are used - one for each of the two volume control chips, one for each output buffering stage, one for the digital logic and one for the input relays. A custom shielded toroidal transformer powers the unit.

Volume is set by two digitally controlled resistor ladder volume controls, with a gain range of -97 dB to +18 dB in 1.5 dB steps. Perreaux lists no wiper noise and no component drift for it. Signal and power earths meet only at a central star point.

Connections are six pairs of RCA inputs, one pair of XLR inputs, one pair of XLR outputs, two pairs of RCA preamp outputs wired in parallel and two pairs of RCA line outputs for recording. A Balanced Input switch selects XLR or RCA for input A. Input D is a home theatre bypass with the output fixed at 0 dB. Each tape output is disconnected when its own source input, E or F, is selected to prevent feedback loops. Two 3.5 mm remote trigger outputs give +5 V DC at a maximum of 10 mA. A 36-button infrared remote control is included.

Pairing

A power amplifier with balanced XLR or unbalanced RCA inputs is required. The matching power amplifiers are the Perreaux 350 and 750. Its dual preamp outputs allow bi-amping or a subwoofer without an RCA splitter.

Alternatives

The Audiant DP32 is Perreaux's other preamplifier, a DAC preamplifier with balanced analogue circuits and asynchronous USB.

Spezifikationen

  • Modellbezeichnung

    SM6 MkII

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    6

  • Analogausgänge (symmetrisch)

    N/A

  • Analogausgänge (unsymmetrisch)

    2 RCA pre + 2 RCA line

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    220

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    10 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    95

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.001

  • Abmessungen (mm)

    430 × 106 × 323

  • Gewicht (kg)

    7.7

  • Offizieller Link