Hifiverse

Vorverstärker - Soulnote sa1.0

Beschreibung, Bilder, technische Daten und Spezifikationen

Soulnote sa1.0
Bildquelle - (c) Soulnote

The sa1.0 is a compact solid-state amplifier from Soulnote, a brand of the Japanese company CSR. Its designer is the engineer Suzuki, whose earlier credits include the NEC A-10 and the Philips LHH800R. Although catalogued as a preamplifier, it combines a line preamplifier, a headphone amplifier and a small integrated amplifier for loudspeakers in one case. The Japanese list price was 100,000 yen before tax, and a black version was sold as the sa1.0B.

Key specs that matter

Speaker output is 10 W per channel into 8 ohms, and 8 ohms is the only permitted load. Frequency response is 5 Hz - 350 kHz (-1 dB). Gain is switchable between 22 dB (high) and 8 dB (low). Inputs are three unbalanced RCA pairs with nickel-plated sockets and one balanced XLR pair wired pin 2 hot. Two RCA preamplifier outputs and a headphone socket are provided. Dimensions are 420 x 98 x 243 mm (W x H x D), weight is 6 kg and power consumption is 27 W.

Engineering and use context

No negative feedback is used in any stage, and the voltage amplification section has resistive loads throughout. Each channel has a single push-pull pair of small TO-220 transistors in the output stage instead of large power devices. A 120 VA R-core transformer powers the circuit.

Its headphone output is taken from the preamplifier circuit rather than from a separate headphone module. Controls are limited to an input selector and a volume knob. In production the volume control is a four-channel part, while the prototype had a two-channel one. Soulnote later offered the ma1.0, with the power supply moved into an external case.

Pairing

Loudspeakers with an 8 ohm nominal impedance and high sensitivity are required for the speaker section. The two pre-outs allow a power amplifier plus an active subwoofer, or two power amplifiers for bi-amping. Sources with a balanced output connect to the XLR input.

Alternatives

The Soulnote P-3 is a dedicated line preamplifier from the brand's later catalogue.

Spezifikationen

  • Modellbezeichnung

    sa1.0

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    N/A

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    420 х 98 х 328

  • Gewicht (kg)

    6.0

  • Offizieller Link

Weitere Komponenten