Pre Two is a fully balanced streaming preamplifier from Alluxity of Herning, Denmark, and the successor to the Pre One. Alluxity used feedback from partners and Pre One owners to define it, adding a DAC module, a streaming module and a redesigned volume control to the analogue line stage. In the UK the price was about GBP 9,950.
Key specs that matter
Analogue inputs are one RCA and one XLR. Digital inputs are AES/EBU, S/PDIF, USB and Toslink, plus the built-in streamer. Outputs are one RCA, one XLR and one additional XLR by-amp output. Streaming covers Tidal, Qobuz, Apple AirPlay, Spotify Connect, MQA and NAS playback, up to 192 kHz/32-bit. Volume runs in ninety-two 1 dB steps from -79 dB to +13 dB, and gain select is 0 dB or -6 dB. Input impedance is 10 kohms, output impedance 75 ohms, and input sensitivity is 2 Vrms (RCA) or 4 Vrms (XLR). Frequency response extends beyond 800 kHz, and THD+N is given as 0.01%. Power consumption is below 30 W with no load. Dimensions are 435 x 105 x 315 mm (W x H x D), and weight is 14 kg.
Engineering and use context
Each channel uses a newly developed fully balanced gain module that supports bi-amplification. Digital sources go through Alluxity's proprietary DAC module, and streaming comes from a Converse Digital module, which Alluxity chose after testing numerous streaming solutions. Tidal, Qobuz and NAS playback are controlled from the MCONNECT app, while Spotify Connect and AirPlay run from their own apps. In the app the volume control is disabled to guard the Alluxity amplifiers against an accidental jump in level.
The -6 dB input trim is intended for sources with very high output. Its predecessor, the Pre One, has a separate toroidal transformer and power supply for each channel, two fully discrete gain modules and a relay-based volume control adjusted in 6 dB, 3 dB and 1.5 dB steps over -69 dB to +6 dB.
On the front sits a 5-inch, 800 x 480 pixel resistive touch display, and its setup menu covers input sensitivity and colour selection. As with all Alluxity products, the casework is carved from a solid slab of aluminium. Finishes are black, white, titanium (grey) and titanium orange, and custom colours are available on request.
Pairing
The matching power amplifiers are the Power Two stereo amplifier or a pair of Mono One monoblocks, connected over XLR. Its by-amp output allows a second power amplifier for bi-amping. A network connection is required for streaming.
Alternatives
Alluxity's Pre One is the brand's earlier analogue preamplifier, without a DAC or streaming module.