Hifiverse

Vorverstärker - Circle Labs Audio P300

Beschreibung, Bilder, technische Daten und Spezifikationen

Circle Labs Audio P300
Bildquelle - (c) Circle Labs Audio

The P300 is a line preamplifier from Circle Labs Audio, made in Krakow, Poland. Circle Labs designed it with the shortest possible signal path, a minimum number of stages and internal wiring kept to a minimum. Its circuit is the company's proprietary Circle Amp topology with JFET and bipolar transistors. An aluminium remote control is supplied, and the warranty runs for 2 years.

Key specs that matter

Line inputs are 2 x XLR and 3 x RCA, and line outputs are 2 x XLR. Input impedance is 66 kohm on XLR and 33 kohm on RCA. Output impedance is 15 ohms, and gain is 8 dB. Frequency response is 2 Hz - 500 kHz (-3 dB). Dimensions are 430 x 342 x 127 mm (W x D x H), net weight is 10.6 kg and shipping weight is 12 kg. Mains supply is 230 V/50 Hz.

Engineering and use context

From input to output the P300 is a fully balanced design. Volume is set by a relay-controlled resistor ladder with 63 steps and shown on a level display on the front panel.

Its ultra-low-noise power supply was developed for this design and is based on independent transformers for the two channels, both with LL cores, together with Elna Silmic II capacitors. Two cascaded stabilisation stages follow. Circle Labs states that this largely separates the sensitive audio path from mains interference. As the reference voltage source the stabilisers use an LED matrix, with many times lower noise than the Zener diodes or IC stabilisers usually found in this position.

On the front panel sit the input selector for RCA 1 to 3 and XLR 4 and 5, a standby switch, the volume knob and indicator LEDs. The remote has VOL+, VOL-, MUTE and DISPLAY buttons, the last one changing display brightness, and its range is about 6 m. After switch-on the P300 runs a 30-second warm-up, shown by flashing front panel lighting, and every start sets the volume to 00. A main power switch sits next to the mains socket on the rear panel. Its housing is milled from 5754 aluminium on CNC machine tools.

Pairing

A power amplifier with balanced XLR inputs is required. Sources with RCA outputs connect to the three single-ended inputs. Matching Circle Labs power amplifiers are the M500 and M200.

Alternatives

Circle Labs Audio has no other line preamplifier in its range.

Spezifikationen

  • Modellbezeichnung

    P300

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    2

  • Analogausgänge (unsymmetrisch)

    N/A

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    66 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    33 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    15

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    2

  • Obere Grenzfrequenz +/- 3dB (Hz)

    500 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    430 x 342 x 127

  • Gewicht (kg)

    10.6

  • Offizieller Link