Hifiverse

Vorverstärker - Pilium Audio Olympus

Beschreibung, Bilder, technische Daten und Spezifikationen

Pilium Audio Olympus
Bildquelle - (c) Pilium Audio

The Olympus is a line preamplifier in the Master Divine line from Pilium Audio of Greece. Pilium places it a step above the Alexander, the top preamplifier of its Divine line. It is a three-chassis design - one preamplifier unit with the audio circuits and two external power supply units, one per channel.

Key specs that matter

Inputs are three pairs of balanced XLR and two pairs of single-ended RCA. Two pairs of XLR outputs are provided, one standard and one marked P-LINK. Voltage gain is +8 dB (x2). Maximum input level is +17 dBu (5.6 V RMS) on XLR and +11 dBu (2.8 V RMS) on RCA. Input impedance is 60 kohms balanced and 30 kohms single-ended, and output impedance is below 10 ohms. Frequency response is 0.1 Hz - 500 kHz (-3 dB), THD+N is 0.0172% at 1 kHz and signal-to-noise ratio is 119 dB. A 127 mm TFT display with 800 x 480 resolution sits on the front panel. Power consumption is 10.5 W in standby and 17 W in operation. Its preamplifier unit measures 480 x 212 x 490 mm (W x H x D) and weighs 52 kg. Each PSU unit measures 235 x 162 x 490 mm and weighs 19.5 kg, and the shipping weight of the set is 110 kg.

Engineering and use context

Pilium specifies the circuit as fully balanced quad-mono and links the three-chassis layout to channel separation. Against the Alexander, the analogue circuit design was revised and the power supplies are new. Their transformers are also new, with a special core, and each is encapsulated and isolated from its chassis.

Volume is set by a newly reworked control that keeps a minimal signal path, with only one resistor in it at any setting. Pilium also lists latest-generation components in the critical areas of the circuit and zero-loss design techniques.

Pairing

A power amplifier with balanced XLR inputs is required. The two output pairs allow two stereo or mono power amplifiers to be connected. Sources with RCA outputs connect to the two single-ended inputs. The Master Divine line also includes the Atlas, Kratos, Cronus and Zeus amplifiers.

Alternatives

The Alexander is the top preamplifier of Pilium's Divine line, a fully balanced dual-mono design with the same input set and one external power supply chassis.

Spezifikationen

  • Modellbezeichnung

    Olympus

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    2

  • Analogausgänge (symmetrisch)

    2

  • Analogausgänge (unsymmetrisch)

    N/A

  • Verstärkung (dBu)

    +8

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    60 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    30 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    <10

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    0.1

  • Obere Grenzfrequenz +/- 3dB (Hz)

    500 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    119

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.0172

  • Abmessungen (mm)

    480 x 490 x 212 (Main) + 235 x 490 x 162 (PSU)

  • Gewicht (kg)

    52 (Main) + 19.5 (PSU)

  • Offizieller Link