Hifiverse

Vorverstärker - Master Fidelity Nadac L

Beschreibung, Bilder, technische Daten und Spezifikationen

Master Fidelity Nadac L
Bildquelle - (c) Master Fidelity

The NADAC L is a digitally controlled analogue line-stage preamplifier from Master Fidelity, the Vancouver company founded in 2015. It is designed to match the NADAC D true 1-bit DAC and the NADAC C master clock. Its Japanese launch was announced on 14 July 2026 at JPY 4,840,000 including tax.

Key specs that matter

Inputs are four balanced XLR and two single-ended RCA, one selectable at a time, and outputs are three XLR and one RCA with independent control. Maximum input level is 12 Vrms balanced and 6 Vrms single-ended, input impedance is 500 kohms and output impedance is 200 ohms balanced, 100 ohms single-ended. Volume runs from 0 to -60 dB in 60 steps of 1 dB. THD+N is 0.00012% at -3 dB, 0.0002% at -20 dB and 0.0008% at -40 dB gain (1 kHz, 10 Hz - 20 kHz). SNR is 130 dBA at -3 dB and 142 dBA at -40 dB, flatness is ±0.08 dB from 10 Hz to 200 kHz and channel separation is 130 dB. L-R gain error is under 0.03 dB at every step and phase error under 0.1 degree, input CMRR is above 80 dB (10 Hz - 20 kHz) and the inputs are precision AC-coupled. Power consumption is 12 W typical, 16 W max. It measures 435 x 95 x 390 mm (W x H x D) and weighs 9.7 kg.

Engineering and use context

Attenuation is done by a dedicated volume-control chip co-developed with a semiconductor partner, a JFET-like custom CMOS ASIC with click-free operation and channel imbalance below 0.1 dB. Master Fidelity says it continues the proprietary DAC chip approach of the NADAC D. Left and right channels are isolated from the power supply through to the signal path in a true dual-mono layout. All XLR inputs and outputs use true differential circuitry, the RCA connections have true single-ended circuits, and the output stages are current drivers. Analogue circuitry and digital control are fully galvanically isolated.

Inside, a custom toroidal transformer has hand-selected cores, with one roll of core material yielding enough for ten units, followed by ideal rectification, capacitor arrays and multi-stage linear regulators. Ultra-precision resistors and hybrid coupling capacitors sit in the signal path. Front-panel LED peak meters with peak hold read input and output levels to ±0.05 dB. Operation is by touchscreen, volume knob and infrared remote.

Pairing

The NADAC D connects over XLR. Mode 2 links two balanced outputs for bi-amping a two-way speaker, and mode 3 drives all three for tri-amping. Mode 4 stores per-input trims for each output, and mode 5 applies global trims.

Alternatives

Master Fidelity makes no other preamplifier, as the NADAC D is a DAC with its own attenuator.

Spezifikationen

  • Modellbezeichnung

    Nadac L

  • Analogeingänge (symmetrisch)

    4

  • Analogeingänge (unsymmetrisch)

    2

  • Analogausgänge (symmetrisch)

    3

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    26

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    116

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.0006

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link