Hifiverse

Vorverstärker - Matrix Audio MP-1

Beschreibung, Bilder, technische Daten und Spezifikationen

Matrix Audio MP-1
Bildquelle - (c) Matrix Audio

MP-1 is a line-level preamplifier from Matrix Audio of China, and the maker lists it as its first Class A preamplifier. It belongs to the M series together with the MS-1 music streamer and the MA-1 power amplifier. Matrix announced the MP-1 on 23 May 2024, and the North American price is USD 6,999. The main amplifier consists of four independent fully balanced amplification units, two per channel, for the in-phase and inverted signals.

Key specs that matter

Inputs are three pairs of XLR and three pairs of RCA, and outputs are two pairs of XLR and one pair of RCA. Input impedance is 40 kohms balanced and 20 kohms single-ended, with output impedance of 40 ohms (XLR) and 20 ohms (RCA). Maximum input level is 9 V RMS (XLR) and 4.5 V RMS (RCA), and maximum output level is 36 V RMS and 18 V RMS. Gain is +12 dB. Frequency response is 20 Hz - 20 kHz (±0.1 dB), with the -3 dB point at 250 kHz. Dynamic range is 129 dB (A-weighted) on XLR and 125 dB on RCA. THD+N is below 0.00015% (A-weighted) on XLR and below 0.00040% on RCA. Crosstalk is -140 dB (XLR) and -130 dB (RCA). Volume has 100 steps. Dimensions are 430 x 349 x 106 mm (W x D x H), and weight is 15.7 kg.

Engineering and use context

A fully differential transistor input stage is followed by a high-bias current pure Class A output stage. Its supply rails reach up to 60 V. An output DC servo keeps the midpoint offset within 1 mV, and the circuit uses no coupling capacitors. RCA input signals are converted into a bipolar signal to suppress common-mode noise. Each input has its own level attenuation and compensation. Volume control is a resistor-array voltage divider in four units, each with 64 precision resistors of 0.001 accuracy and 32 sealed reed relays switched by the MCU. Two 60 W toroidal transformers with square copper wire supply the left and right volume control units and the main amplification unit separately, and Mundorf M-Lytic AG filter capacitors are used. Matrix calls the chassis an H-shaped structure. Its core is a 20 mm CNC-machined aluminium plate that carries all components, and isolated cavities separate the circuit modules. Mains voltage is factory fixed to 100-120 V or 220-240 V.

Pairing

The two XLR outputs allow bi-amping with up to four power amplifiers, and each output can have its own volume. Its matching power amplifier is the MA-1. Trigger input and 12 V trigger output are provided, and the RM4C remote control is supplied.

Alternatives

Matrix Audio has no other dedicated line preamplifier, and the Element P2 combines a preamplifier with a headphone amplifier.

Spezifikationen

  • Modellbezeichnung

    MP-1

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    2

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    12

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    40 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    20 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    40

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    20

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    36 RMS

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    18 RMS

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    250 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.00015 (XLR) + 0.00040 (RCA)

  • Abmessungen (mm)

    430 × 349 × 106

  • Gewicht (kg)

    15.7

  • Offizieller Link