Hifiverse

Vorverstärker - Rega Mercury

Beschreibung, Bilder, technische Daten und Spezifikationen

Rega Mercury
Bildquelle - (c) Rega

The Mercury is a reference preamplifier from the British company Rega. Rega describes it as the largest (by component count) and most complex electronic product it has made, with a circuit whose origin goes back to the first Elicit amplifier of around 1990. Besides the line stage it has a DAC with S/PDIF and USB inputs, a discrete headphone amplifier, a full colour IPS display and a backlit Orbit remote control.

Key specs that matter

Analogue inputs are one balanced XLR line input and four unbalanced RCA line inputs, plus a record in/out loop. Main outputs are an unbalanced RCA pre-out and a balanced XLR pre-out. Digital inputs are two S/PDIF coaxial inputs, two optical inputs and one asynchronous USB input, the last accepting 16 - 32 bit at 44.1 to 192 kHz PCM or DSD64 (DoP). Frequency response is 8 Hz to 28 kHz (-0.5 dB points, 0 dB gain, balanced input/output). THD+N is typically 0.001% (1 kHz, 2 V unbalanced or 4 V balanced) for the preamplifier and 0.0045% (1 kHz, 0 dBFS) for the DAC. Headphone output reaches 9 V/2.5 W into 33 ohms and 10.85 V/0.5 W into 240 ohms (0.1% THD+N). Power consumption is 50 W. The case measures 435 x 97 x 380 mm (W x H x D), and weight is 14 kg.

Engineering and use context

The Mercury uses a discrete, differentially driven, fully symmetrical common base voltage amplifier, with complementary Class A output stages. Linear Systems ultra-low noise FETs are used in the differential quad pair input stages. Volume is set by an Alps Blue Velvet RK27 motorised potentiometer, the type used in the Osiris amplifier, and the main outputs are DC coupled with no output coupling capacitors.

A generously rated toroidal transformer supplies a discrete, symmetrical tracking linear power supply. Its supply voltage is 60% higher than usual for a preamplifier, and each stage has its own localised capacitance. Display, protection and supervisory circuits run from a separate supply.

Digital conversion uses two parallel connected Wolfson DACs, followed by symmetrical analogue filter stages derived from the Saturn CD player. The USB input is galvanically isolated with its own power supply and has two oscillator modules for both sample-rate families. Input 5 can be switched to AV Bypass mode. A 12 V trigger in/out is provided, and standby engages after 20 minutes without signal.

Pairing

A power amplifier with RCA or XLR inputs is required. The matching power amplifier is the Rega Solis. Rega recommends unbalanced connections between Mercury and Solis.

Alternatives

Rega has no other line preamplifier in its range.

Spezifikationen

  • Modellbezeichnung

    Mercury

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    4

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    8

  • Obere Grenzfrequenz +/- 3dB (Hz)

    28 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.001

  • Abmessungen (mm)

    435 x 97 x 380

  • Gewicht (kg)

    14

  • Offizieller Link