Hifiverse

Vorverstärker - Mark Levinson No.626

Beschreibung, Bilder, technische Daten und Spezifikationen

Mark Levinson No.626
Bildquelle - (c) Mark Levinson

The № 626 is the dual-monaural stereo preamplifier of Mark Levinson's 600 Series, presented at High End Munich in 2025 together with the № 631 and № 632 power amplifiers. Retail availability followed in September 2026 at about USD 24,999 in the USA. One chassis holds a line stage, a Pure Phono MM/MC phono stage, the Precision Link III DAC and a Main Drive headphone amplifier.

Key specs that matter

Maximum gain in variable mode is 13.5 dB balanced and 7.5 dB single-ended. Frequency response is 0.4 Hz - 150 kHz (+0.1/-2 dB), and THD+N at 1 kHz is below 0.003% (4 V RMS balanced or 2 V RMS single-ended). Signal-to-noise ratio is above 97 dB wideband unweighted and above 100 dB A-weighted. Input impedance is above 45 kohms, and maximum output is above 22 V RMS balanced and 11 V RMS single-ended. In MM mode the phono stage has 40 dB of gain and 47 kohms with 50 - 680 pF, while MC gain is 60 or 70 dB with loads from 20 ohms to 47 kohms. The DAC delivers 3.7 V RMS at 0 dBFS with THD below 0.0001% at 1 kHz and accepts PCM to 384 kHz and 32 bits and DSD to 11.2 MHz. Dimensions are 455 x 484 x 142.5 mm (W x D x H), and weight is 17.1 kg.

Engineering and use context

Mark Levinson's Pure Path signal path is fully discrete, direct-coupled, fully balanced and dual-monaural. Volume is set by a balanced, current-mode, discrete 15-bit R-2R ladder. Each analogue input - two XLR, three RCA and the phono input - has its own signal switching relay. This is the first Mark Levinson model with the Precision Link III DAC, which uses the ESS ES9039PRO, an 8-channel Hyperstream IV chip, with jitter elimination circuitry and fully balanced, discrete I/V circuitry. Digital inputs are AES/EBU, two coaxial, two optical and an asynchronous USB-C input, and native DSD works with Linux or Android source devices only.

Both phono and headphone circuits operate in class A. A defeatable 15 Hz infrasonic filter is in the phono stage, and the 6.3 mm headphone output has low and high output impedance settings. Outputs run full-range or through a defeatable 80 Hz fourth-order Linkwitz-Riley high-pass filter. Its modular chassis isolates the low-level analogue and digital circuitry from the toroidal linear power supply, with critical components on rubber mounts. The Tectonic exterior has an aluminium and steel chassis anodised in black, a silver plinth and a glass centre panel with red accent lighting.

Pairing

The matching power amplifiers are the № 631 monaural and № 632 stereo models. A moving-magnet or moving-coil cartridge connects to the phono input. The high-pass filter allows a powered subwoofer to be added.

Alternatives

The № 526 is a Mark Levinson preamplifier outside the 600 Series.

Spezifikationen

  • Modellbezeichnung

    No.626

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten