Hifiverse

Vorverstärker - Audio Research LS28SE

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio Research LS28SE
Bildquelle - (c) Audio Research

The LS28SE is a tube line-stage preamplifier from Audio Research. It draws on the company's work on the Reference 160-series power amplifiers and uses a number of upgraded components. A record output, home theatre passthrough, phase invert and mono are part of its feature set.

Key specs that matter

Frequency response is 0.4 Hz - 200 kHz (+0/-3 dB) at rated output into a 200 kohm balanced load. THD+N is below 0.007% at 2 V RMS balanced output, noise is below -100 dBV at maximum volume, dynamic range is 122 dB (AES17) and crosstalk is -105 dB. Gain is 18.5 dB at the balanced main output and 12.5 dB at the single-ended output, with 0 dB at the record output. Input impedance is 100 kohm balanced and 50 kohm single-ended. Output impedance is 600 ohms balanced and 300 ohms single-ended, into a 20 kohm minimum load and 2000 pF maximum capacitance. Maximum input is 16 V RMS balanced and 8 V RMS single-ended. Rated output is 2 V RMS balanced (1 V RMS single-ended), and maximum balanced output is 17 V RMS at below 0.5% THD at 1 kHz. Power consumption is 130 W maximum. It measures 480 x 137 x 348 mm (W x H x D), with handles extending 40 mm forward, and weighs 7.2 kg net.

Engineering and use context

Its tube complement is four 6H30P dual triodes, and Audio Research quotes an expected life of approximately 4,000 hours for them. Electronically regulated low and high voltage supplies have line regulation better than 0.01%. A 45-second warm-up mute operates at switch-on, and the outputs are also muted automatically when low line voltage is sensed.

On the rear panel are four balanced XLR and four single-ended RCA inputs, two balanced and two single-ended main outputs and a record output on both XLR and RCA. Polarity is non-inverting. Volume is set by a rotary control with 103 steps, next to a rotary input selector. Push buttons cover Power, Menu, Enter, Mono, Invert and Mute. Through the menu each input can be named, a tube hours counter can be read and reset, and auto shutdown can be set to off or from 1 to 8 hours. One of the eight inputs can be assigned unity gain in Processor Mode, and the volume control is then disabled for that input. RS-232, an IR input and a 12 V trigger output are also provided.

Pairing

Power amplifiers with balanced or single-ended inputs of at least 20 kohm are required. The matching Audio Research stereo power amplifier is the Reference 160S. A surround processor connects to the unity-gain input.

Alternatives

The Reference 7 is a higher-level Audio Research preamplifier from the Reference line.

Spezifikationen

  • Modellbezeichnung

    LS28SE

  • Analogeingänge (symmetrisch)

    4

  • Analogeingänge (unsymmetrisch)

    4

  • Analogausgänge (symmetrisch)

    3

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    18.5

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    50 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    600

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    300

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    0.4

  • Obere Grenzfrequenz +/- 3dB (Hz)

    200 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    <0.007%

  • Abmessungen (mm)

    480 × 137 × 348

  • Gewicht (kg)

    7.2

  • Offizieller Link