Hifiverse

Vorverstärker - Ayre Acoustics KX-8 Variable Gain

Beschreibung, Bilder, technische Daten und Spezifikationen

Ayre Acoustics KX-8 Variable Gain
Bildquelle - (c) Ayre Acoustics

The KX-8 Variable Gain is a stereo preamplifier in the Ayre Acoustics 8 Series, announced on 23 February 2024 at USD 6,400 for the base version. It uses the true variable gain volume control that first appeared in the company's KX-R preamplifier, in a simpler and more cost-effective form. Ayre sells it in Base, Add DAC, Add USB2, Add NET2 and Full configurations at USD 6,500 to 11,000, in silver or black.

Key specs that matter

Analogue inputs are two balanced (XLR) and three single-ended (RCA), with balanced and single-ended outputs. Output level is 4 V RMS balanced and 2 V RMS single-ended. Maximum input level is 8 V RMS on the balanced inputs and 4 V RMS on the unbalanced inputs. Input impedance is 2 megohms balanced (1 megohm per phase) and 1 megohm unbalanced. Frequency response is DC - 250 kHz. Power consumption is 40 W in operating mode and 60 W with the volume control active. Dimensions are 440 x 330 x 115 mm (W x D x H), and weight is 5.7 kg.

Engineering and use context

Volume is set by Ayre's Continuously Variable Gain Transimpedance (CVGT) circuit, which varies the gain to match the output level the system requires instead of attenuating the signal. Ayre states that the signal-to-noise ratio stays constant at any volume level. Circuitry is zero-feedback, fully balanced and discrete throughout, with the Equilock gain stage, the Diamond output stage and a linear analogue power supply on high-speed circuit board material. Both the balanced and the unbalanced front-panel headphone connectors are driven by a Diamond output headphone amplifier circuit, and this is the first Ayre headphone output with Variable Gain control.

Its optional DAC uses the ESS ES9038Q2M chip with a Xilinx Spartan FPGA, Ayre's asynchronous S/PDIF input, a custom digital clock and Ayre's minimum phase digital filter with single-pass 16x oversampling. AES/EBU, coaxial and optical inputs accept PCM at 44.1 - 192 kHz and 16 - 24 bits, plus DSD64 as DoP. With the USB2 board the asynchronous USB input reaches 384 kHz and DSD512 in RAW form. The Net2 Ethernet board runs to 384 kHz and DSD128 as DoP, supports Tidal Connect, Qobuz Connect and Spotify Connect, and is JPLAY certified. In the specification table the maximum is six digital inputs - Ethernet, asynchronous USB, AES/EBU, S/PDIF and two optical. Linked Ayre components are controlled through the AyreLink communication trigger system.

Pairing

A power amplifier with balanced XLR or single-ended RCA inputs is required. The matching power amplifier is the VX-8, connected through AyreLink. Digital sources connect directly once the DAC board is installed.

Alternatives

The K-5xeMP is the preamplifier of Ayre's 5 Series.

Spezifikationen

  • Modellbezeichnung

    KX-8 Variable Gain

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    2 000 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    1 000 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    4

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    2

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    250 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    440 x 330 x 115

  • Gewicht (kg)

    5.7

  • Offizieller Link