Hifiverse

Vorverstärker - Constellation Audio Inspiration 2 Preamplifier

Beschreibung, Bilder, technische Daten und Spezifikationen

Constellation Audio Inspiration 2 Preamplifier
Bildquelle - (c) Constellation Audio

The Inspiration 2 Preamplifier is a single-chassis line preamplifier in the Inspiration series of Constellation Audio. According to Constellation, it uses the same core audio circuits as the company's larger preamplifiers, and the second generation adds a switch-mode power supply in place of a linear one.

Key specs that matter

Inputs are three stereo XLR and three stereo RCA, plus one USB port for control. Outputs are two stereo XLR and two stereo RCA, with a 12-volt trigger. THD+N is below 0.001% (20 Hz - 20 kHz, 2 V out) and below 0.1% (20 Hz - 20 kHz, 10 V out). Signal-to-noise ratio is above 105 dB, A-weighted. Input impedance is 20 kohms balanced and 10 kohms single-ended, and output impedance is below 50 ohms. Volume control resolution is 0.5 dB from 0 dB to -90 dBFS. Dimensions are 432 x 140 x 381 mm (W x H x D), and weight is 11.5 kg.

Engineering and use context

At its core is the Line Stage Gain Module, Constellation's fully balanced, mirror-imaged circuit made with hand-matched, ultra-low-noise transistors. A servo circuit monitors the signal balance and corrects minute inconsistencies. Volume is set by a digitally controlled resistor-ladder volume control.

Constellation's Switch-Mode Power Supply (SMPS) delivers DC power that the company quotes as more than 20 dB quieter than a typical linear supply. Its mirrored circuit layout places the left channel opposite the right, so the left-channel inputs and outputs are on one side of the rear panel and the right-channel connections on the other. Looking at the rear panel, the outputs on the left side are for the right channel.

An LCD touchscreen gives access to every adjustment, and a machined aluminium remote control is supplied. Each input can be given minimum and maximum output levels, and one input can be set up as a home-theatre bypass with fixed volume. The 3.5 mm trigger jack outputs 12 V DC when the preamplifier is on.

Pairing

The XLR outputs connect to the Constellation Direct input of Constellation amplifiers, bypassing the amplifier input stage. RCA outputs are provided for amplifiers and recorders without XLR inputs. Line-level sources with balanced or unbalanced outputs are required.

Alternatives

The Revelation 2 Preamplifier is the larger Constellation Audio line preamplifier.

Spezifikationen

  • Modellbezeichnung

    Inspiration 2 Preamplifier

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    2

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    10 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    <50

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    <50

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    >105

  • Klirrfaktor + Rauschen (THD+N) (%)

    <0.001

  • Abmessungen (mm)

    432 x 216 x 483

  • Gewicht (kg)

    11.5

  • Offizieller Link