Hifiverse

Vorverstärker - Absolare Eternum Pre

Beschreibung, Bilder, technische Daten und Spezifikationen

Absolare Eternum Pre
Bildquelle - (c) Absolare

The Eternum Pre is a fully balanced, all-tube line preamplifier from Absolare USA LLC, the American company founded in 2008. It sits above the single-chassis Preamplifier 2 and Altius models in the Absolare range. First shown in November 2022, it was announced on 2 June 2023 and presented at High End Munich 2023 with Rockport speakers. The price is USD 85,000, and in Norway it is NOK 1,190,000.

Key specs that matter

Design is all tube, zero feedback and fully balanced, in two chassis (power supply and signal). The attenuator is a continuous carbon strip type with remote control. Tube complement is four 12AU7/ECC82 or equivalents. Bandwidth is 20 Hz - 20 kHz (±0.2 dB) and 10 Hz - 45 kHz (±1.0 dB). Inputs are four RCA or four XLR, depending on the model, or two RCA plus two XLR in the RCA/XLR model. Outputs are two XLR, or one RCA plus one XLR in the RCA/XLR model. Input impedance is 50 kOhm, maximum gain is 18 dB and output impedance is 750 ohms. Each chassis measures 38.2 x 52.6 x 14.8 cm (W x D x H, excl. feet), and weight is 19 kg for the signal chassis and 25 kg for the power supply.

Engineering and use context

Absolare describes the Eternum as a pure class A, dual mono preamplifier with two fully separated balanced preamplifiers, one for each channel. Its input section is high impedance and high gain with a minimum number of components, while the output section is low impedance with unity gain. All power supplies are enclosed in the separate chassis to reduce hum, noise and vibration. Signal ground is separated from chassis ground to isolate hum and noise from the AC mains.

XLR inputs and outputs are transformer balanced. Coupling capacitors are Duelund select CAST Silver/Copper and Silver types, used with matched Amtrans AMRG resistors. All internal connections use Echole Infinity cables. For attenuation Absolare uses a customised ALPS 500 series attenuator with a machined solid bronze housing and a specially developed resistive element. A large CNC-machined aluminium tube housing carries the tubes, and the signal components are mounted directly to its underside. Every soldered joint uses silver-gold alloy solder, signal connectors are gold-plated tellurium copper, and tube sockets are pure Teflon with gold-plated copper contacts. Its laser-cut, precision-welded single-piece aluminium chassis is encased in high-density fibre panels. Several colour and stitching options of automotive leather covering are available.

Pairing

A power amplifier with XLR inputs is required for the balanced outputs. The two XLR outputs allow bi-amping.

Alternatives

The Absolare Preamplifier 2 is the single-chassis, single-ended all-tube preamplifier of the range, with power supply and signal sections separated by an aluminium wall.

Spezifikationen

  • Modellbezeichnung

    Eternum Pre

  • Analogeingänge (symmetrisch)

    4

  • Analogeingänge (unsymmetrisch)

    4

  • Analogausgänge (symmetrisch)

    2

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    18

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    50 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    50 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    750

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    750

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    382 x 526 x 148

  • Gewicht (kg)

    19 (25 with PSU)

  • Offizieller Link