The CM-1500 is a hybrid passive preamplifier from Phasemation of Yokohama, Japan, released in 2024 as the brother model of the CM-2200 Control Meister. Like every Control Meister it has no built-in active circuit and no power supply. Phasemation lowered the price with printed circuit boards and a simplified chassis structure. The US price is USD 7,500, and the front panel comes in gold or black.
Key specs that matter
Inputs are three RCA and two XLR, and outputs are two RCA and two XLR, all usable at the same time. Input impedance is 47 kohms or more, and output impedance is 250 ohms or less. Channel separation is 100 dB or more (20 Hz - 20 kHz), and frequency response is 10 Hz - 100 kHz (+0, -3 dB). Gain switches in three steps of +6, 0 and -10 dB, and the attenuator has 23 contact points from 0 to -50 dB. The unit measures 430 x 93 x 362 mm (W x H x D) and weighs 6.5 kg.
Engineering and use context
Level is set by Phasemation's patented Hybrid Passive Attenuator, which combines a resistive attenuator with a transformer attenuator to give high input impedance and low output impedance. Its balanced attenuator transformer carries two attenuator windings, one for the HOT and one for the COLD leg, on a single core. Even with an unbalanced input the COLD signal is generated inside the transformer, so the output is fully balanced. Phasemation states that this layout reduces phase distortion within the audible band.
Its +6 dB gain transformer comes from the CM-2200, which has 46 attenuator contact points against 23 on the CM-1500. Phasemation re-examined the winding structure to keep wide frequency response and stable impedance at every gain setting. Ultra-thin 0.1 mm Super Malloy is used for the core, and the windings are PC-TripleC polyurethane wire.
A 10 mm slanted aluminium front panel sits on a chassis and top cover of 1.6 mm copper-plated steel against induced hum, with low dielectric paint on the cover and double magnetic shielding under the transformer. Rotary switches have gold-plated contacts, RCA terminals are gold-plated machined brass, and the XLR terminals are gold-plated Neutrik parts. The feet are metal insulators of combined materials.
Pairing
A power amplifier with a balanced or single-ended input is required. The simultaneous outputs allow two power amplifiers, or a power amplifier and a powered subwoofer, at once.
Alternatives
The Phasemation CM-2200 Control Meister is the higher hybrid passive preamplifier, with 46 attenuator contact points and +6 dB gain.