Hifiverse

Vorverstärker - Manunta Audio Classic Preamplifier

Beschreibung, Bilder, technische Daten und Spezifikationen

Manunta Audio Classic Preamplifier
Bildquelle - (c) Manunta Audio

The Classic Preamplifier is a stereo preamplifier with a phono section and a built-in headphone amplifier from Manunta, the brand that M2Tech of Pisa launched in 2025. It belongs to the analogue Classic series next to the Classic Integrated Amplifier, the Classic Power Amplifier and the Classic DAC/renderer, and it handles analogue signals only. M2Tech assembles it by hand in Italy, and its mechanical parts are made in Italy.

Key specs that matter

There are five line inputs - three on RCA and two balanced on XLR - plus a phono input that accepts both MM and MC types and an RCA processor loop for an external signal processor or recorder. The main output comes on both RCA and XLR sockets. Sensitivity for 1 Vrms output is 230 mV on the line inputs, 5 mV for MM and 0.6 mV for MC. Input impedance is 47 kOhm on single-ended and MM, 20 kOhm on balanced, and adjustable from 10 to 1,000 Ohm for MC. Signal-to-noise ratio reaches 124 dBA at the RCA output and 128 dBA at the XLR output with line sources, 80 dBA for MM and 72 dBA for MC. THD+N is 0.05% at 1 kHz. The line output delivers up to 10 Vrms single-ended and 20 Vrms balanced before clipping, and the headphone amplifier gives 8 W per channel into 8 Ohm or 2 W into 32 Ohm. The chassis is 420 mm wide, 313 mm deep and 90 mm tall and weighs 10 kg net.

Engineering and use context

Discrete components make up the amplifier circuit, and the whole board is built with through-hole parts, which M2Tech chose because they give a wider choice of components than surface-mount types. Transformers couple the balanced output, so it can feed active speakers over long cable runs and the speakers can stand far from the rest of the system. Selecting MM bypasses the MC stage. An infrared remote is supplied, and a WiFi module lets a free app for Android and iOS control volume and inputs from a phone. One 3.5 mm trigger input and two trigger outputs switch other components on and off. The unit draws 35 VA in use and 0.1 VA in standby, runs on 110-130 V or 220-240 V mains, and uses readily available replaceable parts to meet EU repairability rules.

Pairing

The output stage is designed for power amplifiers with a low input impedance and for long, high-capacitance interconnects, so the preamp can drive a stereo power amplifier, a pair of monoblocks or powered speakers directly. A matching Manunta set adds the stereo power amplifier and the DAC/renderer of the same series, while the adjustable MC loading lets the owner match the phono input to a specific pickup.

Alternatives

The Manunta Tosh Rev.b from the Rockstars series is a line-only preamplifier without a phono stage, offered in silver or black.

Spezifikationen

  • Modellbezeichnung

    Classic Preamplifier

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3 + 1 (Phono)

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    230

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    124

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.05

  • Abmessungen (mm)

    420 x 313 x 90

  • Gewicht (kg)

    10

  • Offizieller Link