Hifiverse

Vorverstärker - Luxman CL-38uC

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman CL-38uC
Bildquelle - (c) Luxman

The CL-38uC is a vacuum tube control amplifier from Luxman, the Japanese company that launched its first tube integrated amplifier, the SQ-5A, in 1961. It is modelled on the CL-35 of 1970 and keeps the outer wooden case of the 38 series, while the chassis is expanded to a width of 440 mm. Balanced inputs are newly added in this model.

Key specs that matter

Input sensitivity and impedance are 2.0 mV / 47 kohms for MM, 0.3 mV / 100 ohms for MC high and 0.08 mV / 30 ohms for MC low. Both line inputs have a sensitivity of 190 mV, with 50 kohms for LINE and 20 kohms for BAL.LINE. Rated output is 1 V at 300 ohms. Frequency response is 20 Hz - 20 kHz (±0.5 dB) for phono and 10 Hz - 70 kHz (-3 dB) for the line inputs. THD is 0.006% or less at 1 kHz and 0.06% or less from 20 Hz to 20 kHz. S/N (IHF-A) is 68 dB or more for MM, 63 dB for MC high, 60 dB for MC low and 100 dB for line. Its tube complement is three ECC83S and five ECC82. Power consumption is 35 W. It measures 440 x 169 x 307 mm and weighs 13.3 kg.

Engineering and use context

All stages use SRPP (Shunt Regulated Push Pull) circuitry. Luxman states that SRPP gives a flat frequency response, a low output impedance, low distortion and extended tube life. Tubes come from JJ Electronic of Slovakia, chosen according to Luxman for their reliability, long life and ease of operation.

The built-in phono equaliser is compatible with MM and MC cartridges. MC-low and MC-high inputs each have independent MC step-up transformers, selected with the MC impedance lever switch. An independent left and right two-step gain selector is also provided. Dedicated transformers sit on the balanced input terminals, and the maximum input level there is equivalent to 2.5 V.

Tone controls give ±8 dB with three selectable turnover frequencies each - 150, 300 or 600 Hz for bass and 1.5, 3 or 6 kHz for treble. A low-cut filter operates at 30 Hz with a slope of -6 dB per octave. Inside the wooden case, the internal chassis is a shielded metal enclosure. Volume can be adjusted from the listening position with the compact aluminium RA-25 remote control.

Pairing

A turntable with an MM or MC cartridge connects directly to the phono inputs. Sources on the balanced input must not exceed 2.5 V output. The matching power amplifier is the Luxman MQ-88uC tube amplifier, modelled on the MQ-60 of 1969.

Alternatives

The Luxman C-900u is a solid-state control amplifier of the brand with LECUA 1000 volume control and a four-module balanced circuit.

Spezifikationen

  • Modellbezeichnung

    CL-38uC

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    4

  • Analogausgänge (symmetrisch)

    N/A

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    190

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    50 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    100

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.06

  • Abmessungen (mm)

    440 x 169 x 307

  • Gewicht (kg)

    13.3

  • Offizieller Link

Weitere Komponenten