Hifiverse

Vorverstärker - Accuphase C-3900

Beschreibung, Bilder, technische Daten und Spezifikationen

Accuphase C-3900
Bildquelle - (c) Accuphase

The C-3900 is the top-of-the-line precision stereo preamplifier from Accuphase Laboratory of Yokohama, Japan. Its development began to celebrate the 50th anniversary of the company's founding and took five years, and it was introduced in 2020 with the Dual Balanced AAVA volume control. It was later succeeded by the C-3900S.

Key specs that matter

There are seven line-level inputs and four balanced inputs, with two sets of line-level and balanced outputs, recorder input and output connectors, and line-level and balanced EXT PRE inputs. Overall gain is switchable to 12, 18 or 24 dB. Rated output voltage is 2 V with an output impedance of 50 ohms, and maximum output level is 7.0 V (20 - 20,000 Hz). Total harmonic distortion is 0.005% and crosstalk is -90 dB at 10 kHz. S/N ratio at rated output is 118 dB, with input-converted noise of -130 dBV. Maximum dimensions are 477 x 156 x 412 mm (W x H x D), and net weight is 24.6 kg.

Engineering and use context

AAVA (Accuphase Analog Vari-gain Amplifier) eliminates resistor-based attenuation of the input signal. Volume is set directly by a combination of V-I (voltage-current) conversion circuits of different gain, and according to Accuphase impedance and frequency response stay unchanged at every volume position. Balanced AAVA uses two AAVA circuits in a balanced connection. In the C-3900 two such units are driven in parallel as Dual Balanced AAVA, which Accuphase says lowers the noise level by a further 30 percent compared to previous models.

Ahead of the volume control is a high-gain, discrete current feedback input amplifier with ANCC (Accuphase Noise and Distortion Cancelling Circuit). Left and right have separate power supplies with toroidal power transformers and a total of twelve 10,000 µF filtering capacitors, as well as separate unit amplifiers. Signal switching uses logic-controlled relays, and the signal printed circuit boards are made of glass cloth fluorocarbon resin with low dielectric constant.

Its in-house volume sensor uses a massive extruded aluminium block to detect the angular position of the knob. With the supplied Remote Commander RC-250 a motor turns the knob through gears held at constant meshing pressure. The headphone amplifier has power transistors in a parallel push-pull output stage. A champagne gold front panel, a natural grain wood cabinet and High Carbon cast iron insulator feet are used.

Pairing

The balanced and line outputs require a power amplifier input of at least 600 ohms. Its matching phono stage is the Accuphase C-47 Stereo Phono Amplifier. The EXT PRE inputs allow an external preamplifier to be integrated.

Alternatives

The Accuphase C-2900 is the precision stereo preamplifier below the C-3900, with Balanced AAVA volume control.

Spezifikationen

  • Modellbezeichnung

    C-3900

  • Analogeingänge (symmetrisch)

    4

  • Analogeingänge (unsymmetrisch)

    6

  • Analogausgänge (symmetrisch)

    2

  • Analogausgänge (unsymmetrisch)

    3

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    412 х 477 х 156

  • Gewicht (kg)

    24,6

  • Offizieller Link

Weitere Komponenten