Hifiverse

Vorverstärker - Audio Analogue Absolute

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio Analogue Absolute
Bildquelle - (c) Audio Analogue

The ABsolute Line Preamplifier is the reference line stage of Audio Analogue, the Italian brand of AF Group Srl, and belongs to the ABsolute range developed in the Airtech laboratories. Audio Analogue bases it on the preamplification sections developed for its recent amplifiers. In the ABsolute range it sits next to the pure class A monophonic power amplifier.

Key specs that matter

Inputs are three stereo RCA and two balanced XLR, all at 47 kOhm, and outputs are two stereo RCA and two stereo XLR. Gain is 5.58 dB at the unbalanced outputs and 11.62 dB at the balanced outputs. Frequency response extends to 200 kHz (0 dB attenuation, -0.5 dB). Balanced output noise is 20.4 µV (20 Hz - 80 kHz) and 7.7 µV (A-weighted). SNR referred to 1 V RMS is 93.8 dB (20 Hz - 80 kHz), 98.3 dB (20 Hz - 22 kHz) and 102.3 dB (A-weighted). Standby consumption is 0.5 W. It measures 140 x 480 x 385 mm (H x W x D) and weighs 22 kg.

Engineering and use context

An inductive power supply is used to minimise mains noise, with two transformers of about 50 W each, both electrostatically and magnetically shielded and resin-coated. Each stage sits on a separate board in a fully dual-mono configuration from the power supply onward, and the preamplifier boards are mechanically shielded from the power supply section. The circuit is fully differential, from differential input to differential output, with zero global feedback. Its gain stage uses the proprietary SeGeSTA structure, short for Single Gain Stage Transconductance Amplifier.

Volume is set by a relay-switched resistor network. Audio Analogue states that this gives a significant improvement in distortion over semiconductor volume controls, because of the quality of the resistors. Relay input switches minimise non-linearities and disconnect unused inputs. Oversized military resistors in traditional through-hole mounting reduce thermal distortion, the capacitors are audio grade, and a microcontroller manages the unit. Internal wiring and the power cable come from Airtech.

In set-up mode the remote selects LED brightness, balance and four volume scales, from a scale for high-efficiency loudspeakers to a linear-in-dB one. Direct mode sets input 3 to maximum volume. Supplied with the unit are the RC10000 remote control, a power cord and a trigger cable.

Pairing

A power amplifier with balanced XLR or RCA inputs is required. The matching power amplifier is the ABsolute pure class A monoblock, and the trigger output switches Audio Analogue power amplifiers such as the Donizetti on and off.

Alternatives

The Audio Analogue Bellini Anniversary is the line preamplifier of the brand's Anniversary range, also fully differential with zero global feedback.

Spezifikationen

  • Modellbezeichnung

    Absolute

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    2

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    11,62 (XLR), 5,58 (RCA)

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    47 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    80 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    N/A

  • Klirrfaktor + Rauschen (THD+N) (%)

    N/A

  • Abmessungen (mm)

    140x480x385

  • Gewicht (kg)

    22

  • Offizieller Link