Hifiverse

Vorverstärker - QUAD 33 Preamplifier

Beschreibung, Bilder, technische Daten und Spezifikationen

QUAD 33 Preamplifier
Bildquelle - (c) QUAD

The QUAD 33 is an analogue preamplifier from Quad and a new version of the control unit first released together with the 303 power amplifier more than 50 years ago. Launched in 1967, the original 33 sold around 120,000 units before production ended in 1982. Quad introduced the new model in 2024. It uses digital microprocessor control but otherwise follows a classic analogue design, and it comes with a power cord, a remote control and a user manual.

Key specs that matter

Inputs are three RCA line inputs, one balanced XLR pair and one phono input switchable between MM and MC. Outputs are an RCA AUX output, an XLR output, an RCA pre-out, a headphone output and two 12 V trigger outputs. Gain is 0 dB (line/XLR), +46 dB (MM) and +63.5 dB (MC), with input impedance of 10 kohms (line/XLR), 47 kohms/100 pF (MM) and 100 ohms/1.7 nF (MC). THD is below 0.0005% (1 kHz, line/XLR) and below 0.002% (1 kHz, phono). Frequency response is 20 Hz - 20 kHz (±0.2 dB). S/N is above 108 dB (line/XLR), 82 dB (MM) and 74 dB (MC), all A-weighted. Output impedance is 120 ohms. Dimensions are 258 x 94 x 165 mm (W x H x D), and net weight is 4 kg.

Engineering and use context

A dedicated low-noise MM/MC phono stage uses ultra-low noise audio op-amps, and its RIAA circuit has its own dual bipolar/JFET op-amp. Switching between MM and MC needs no change of hardware.

Volume is set by a fully analogue, motorised ALPS potentiometer that rotates automatically when the level is changed from the remote. Quad's Tilt control returns, rotating the audible frequency range on a 700 Hz axis in 1 dB steps. Alongside it are a bass control with a range of -3 dB to +3 dB and a balance control.

For headphones there is a dedicated current-feedback headphone amplifier with THD below 0.01% (1 kHz, 50 mW), an output impedance of 2.35 ohms and a load range of 20 - 600 ohms. Settings appear on a backlit LCD screen, and brightness is adjustable for both the buttons and the screen. A machined and anodised front panel sits on an all-metal chassis in Classic QUAD Grey.

Pairing

The matching power amplifier is the QUAD 303, driven from the dedicated stereo pre-outputs. Its trigger outputs allow a power amplifier to switch on with the preamplifier. MM and MC cartridges connect without a step-up transformer.

Alternatives

The QC Twenty Four is Quad's tube preamplifier, with a 6111WA double triode and relay input switching.

Spezifikationen

  • Modellbezeichnung

    33 Preamplifier

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    4

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    29

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    10000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    106

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.01

  • Abmessungen (mm)

    258 x 82.9 x 165

  • Gewicht (kg)

    4

  • Offizieller Link