The Tune Three is a hybrid stereo power amplifier from hARt Lab of Chalandri, Greece, with driver tubes and a MOSFET output stage. hARt Lab calls it the Reference Dual Mono Power Amplifier and lists it beside the Tune Two Reference Preamplifier. It was presented at High End Munich in 2022 and 2023, where its listed price was EUR 30,000.
Key specs that matter
Rated power is 2 x 165 W RMS into 8 ohms and 2 x 275 W RMS into 4 ohms. Input sensitivity for maximum power is 3.4 V RMS. Frequency response is 5 Hz - 100 kHz. Power consumption is 2 W in standby and 200 W at idle. Dimensions are 200 x 430 x 410 mm (H x W x D) including jacks, and weight is 32 kg, or 42 kg packed in a 310 x 550 x 490 mm carton.
Engineering and use context
Its two channels are in dual-mono configuration. A tube voltage amplifier and a MOSFET transimpedance amplifier share one circuit topology with matched components, and hARt Lab specifies a total absence of feedback. The driver stage is a single class A tube stage with two CV181 tubes (or equivalent), lightly biased and without feedback. A high-current MOSFET output stage follows it.
For the power supply, hARt Lab uses its VAcc battery emulator with custom-wound mains transformers, intended to keep the supply unaffected by mains fluctuations. Grounding runs to a GStar single common earth point, which the maker credits with immunity from mains noise and ground loops.
Its chassis is amorphous wooden fibreboard, which hARt Lab says damps unwanted vibration and mechanical noise feedback, lowering the noise floor and crosstalk. The wave-dampening chassis design aims at flexibility and stiffness at the same time. FloatO anti-resonance feet are integrated into the base. Production combines CNC machining and 3D printing, with wood, metal, plastic and rubber parts. Side panels are removable and can be changed in colour or material. Front illumination can be set to any of 15 colours, dimmed in 3 levels or switched off. The paint finish is MICoat, a multi-coat process.
Pairing
The matching preamplifier is the hARt Lab Tune Two. A preamplifier output that reaches the rated input sensitivity is required for full power.
Alternatives
hARt Lab has no other stereo power amplifier in its range.