The STA-9X is a Class A+D stereo power amplifier from NuPrime Audio, the company formed by former NuForce engineers. It belongs to the NuPrime 8 & 9 Series, has a half-width chassis like the DAC-9X and Stream-9 and can be bridged into a mono amplifier. NuPrime describes it as an improvement on the ULCAM (Ultra Linear Class A Module) plus Class D design of the STA-9, using the design concept of the higher AMG-STA. The US list price is USD 1,199.
Key specs that matter
Rated power is 2 x 130 W in stereo and 1 x 330 W in bridged mono, at 8 and 4 ohms, with peak output of 2 x 170 W and 1 x 370 W into 8 ohms. Input impedance is 47 kohms and output impedance is 20 milliohms. Gain is 29.1 dB (voltage gain 28.5), and input sensitivity is 1.1 Vrms to rated power. Frequency response is 10 Hz - 50 kHz. Signal-to-noise ratio exceeds 90 dB at 1 W, 10 W and 100 W, and THD+N is 0.005% in both stereo and mono. Mains is 115 or 230 V AC, set by a voltage select switch, with a 3 A slow-blow fuse. Each unit measures 235 x 55 x 281 mm (W x H x D) and weighs 4 kg.
Engineering and use context
At the front of the circuit is a high-impedance, single-ended amplifier stage with no negative feedback, and NuPrime adds an even-order (H2) harmonic circuit. It is followed by a dual feedback Class D power stage. Instead of a fixed clock, a self-oscillating circuit generates the pulse-width modulation. Its switching frequency is 750 kHz, and NuPrime notes that most Class D amplifiers switch at 300 kHz or lower.
Power comes from a new linear supply with a high-efficiency toroidal transformer, intended for lower high-frequency noise and stronger low-frequency performance. The signal path avoids cross-linking capacitors, and NuPrime quotes a frequency response extending to DC. Output current capability is 130% higher than in the STA-9. According to NuPrime, the amplifier is highly reliable with no load connected, and short-circuit protection has been improved over the STA-9. NuPrime's own isolation feet absorb vibrations.
Connections comprise an RCA input and an XLR input selected by a toggle switch, stereo speaker outputs, a mono speaker output for bridged use and 12 V trigger in and out. Only one of the two inputs should be connected at a time. Finishes are black and silver.
Pairing
A preamplifier or a DAC with variable output is required. The matching preamplifier in the 9 Series is the DAC-9X. Bridged mono operation requires two units for a stereo pair.
Alternatives
The AMG-STA is the higher NuPrime stereo power amplifier whose design concept the STA-9X uses.