Hifiverse

Endstufen Stereo - First Watt SIT-4

Beschreibung, Bilder, technische Daten und Spezifikationen

First Watt SIT-4
Bildquelle - (c) First Watt

The SIT-4 is a two-channel power amplifier from First Watt, the low-volume line of designs by Nelson Pass, and it costs about USD 5,000. It is the fourth First Watt amplifier with Static Induction Transistors (SIT) as the power devices. Development began in 2018 and was finished as 2024 began, and the manual commentary is dated 1 January 2024. First Watt designed it around Altec, Klipsch, JBL, Lowther and other high-efficiency loudspeakers.

Key specs that matter

Rated output is 10 W per channel into 8 ohms at 2% THD and 5 W into 4 ohms. First Watt measures at 120 V AC into 8 ohms - distortion 0.6% at 1 W, input impedance 100 kohms, gain 20 dB, output impedance 4 ohms. Frequency response is 4 Hz - 80 kHz (-3 dB), and noise is 75 µV unweighted (20 Hz - 20 kHz). Its power consumption is 200 W, with a 3AG slow-blow fuse of 2.5 A for 120 V or 1.25 A for 240 V. Weight is 14.5 kg, and the case measures 432 x 381 x 127 mm (W x D x H).

Engineering and use context

Each channel is a single-ended Class A circuit with one SIT in common-source mode and no feedback. Its device is the Tokin THF51, rated at 600 V, 30 A and 400 W. In common-source mode the SIT supplies both voltage and current gain in a single stage, and there is no output transformer. Quoting the patent of inventor Nishizawa, First Watt notes that the SIT drain characteristic simulates the anode characteristic of a triode very closely. A conventional MOSFET mu-follower current source sets the bias, and an NOS Toshiba 2SK170 JFET buffers the input. First Watt shows second-harmonic dominance up to 10 W, with the negative-phase second-harmonic character it uses as the standard for its SIT amplifiers. Overload is softer than usual, with more rounded waveforms. Nelson Pass reports that it handles 4-ohm loads and runs his SR-1 test speakers of 3.8 ohms and 86 dB/W. At the output, the red terminal is grounded and the black one is live, so with an active subwoofer the red terminal is treated as common ground. Like every First Watt model, it shares the basic chassis and power transformer of the range. It improves over about half an hour of warm-up and carries a three-year parts and labour warranty.

Pairing

High-efficiency loudspeakers are the design target. The input is single-ended only.

Alternatives

The First Watt SIT-3 is the stereo SIT amplifier with a common-drain output stage, 18 W into 8 ohms and 11.5 dB of gain.

Spezifikationen

  • Modellbezeichnung

    SIT-4

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    10

  • Ausgangsleistung (4Ω) (W)

    5

  • Verstärkung (dBu)

    20

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0.6

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link