Hifiverse

Endstufen Stereo - YBA Signature Stereo Power Amplifier

Beschreibung, Bilder, technische Daten und Spezifikationen

YBA Signature Stereo Power Amplifier
Bildquelle - (c) YBA

The Signature Stereo Power Amplifier is a solid-state stereo power amplifier from the Signature range of YBA, the French company of Yves-Bernard André, with a Signature Mono power amplifier alongside it. Its natural aluminium case has no buttons on the front, only a standby touch switch in the YBA logo, an IR sensor and a display that indicates the music signal level. Each unit comes with a certificate signed by the founder, and his signature also appears inside. The price in Australia is AUD 28,500.

Key specs that matter

Rated output is 200 W per channel into 8 ohms and 400 W per channel into 4 ohms in stereo, and 600 W into 8 ohms bridged in mono. Inputs are one RCA pair, one balanced XLR pair for stereo and one balanced XLR input for mono. Two pairs of speaker outputs are provided. Power comes from a linear supply with a 1000 VA UI-Core transformer, and standby consumption is below 0.5 W. Signal-to-noise ratio is above 95 dB, frequency response is 20 Hz - 20 kHz (-0.5 dB) and THD+N is below 0.1% (20 Hz - 20 kHz). Dimensions are 430 x 390 x 170 mm (W x D x H) and weight is 42.5 kg.

Engineering and use context

YBA describes the circuit as completely symmetrical. According to the company, this cancels defects introduced via the power source, minimises parasitic ground currents and avoids passive components in the signal path. Component count is minimised, and the signal passes through transistors only.

A complementary double differential input stage comes first. It is followed by a pre-driver stage for impedance adaptation and initial voltage amplification. Next, a third stage completes the voltage amplification and supplies the current and voltage for the output stage, which is directly coupled to the speakers.

Circuit geometry keeps the distances between components and the connecting wires to a minimum, with only a few centimetres of wire at the input and output. Both transformers are suspended to reduce the transmission of their vibrations to the rest of the amplifier.

Its RCA and balanced stereo inputs work in stereo mode only, and the separate balanced input in bridged mono mode only. In bridged mono, the positive terminal of the speaker connects to the left channel's positive output and the negative terminal to the right channel's positive output.

Pairing

A preamplifier with RCA or balanced XLR outputs is required. Loudspeakers rated at 8 or 4 ohms are specified. The matching preamplifier is the Signature PRE-Amplifier MKII. Two pairs of speaker outputs allow bi-wiring.

Alternatives

The YBA Passion A650 is a stereo power amplifier with a bridged mono mode and a 1000 VA UI-Core transformer in a 25 kg case.

Spezifikationen

  • Modellbezeichnung

    Signature Stereo Power Amplifier

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 200

  • Ausgangsleistung (4Ω) (W)

    2 x 400

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20000

  • Signal-Rausch-Abstand (dB)

    95

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0.1

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    430 x 390 x 170

  • Gewicht (kg)

    42.5

  • Offizieller Link