The Esoteric S-02 is a stereo power amplifier that follows the design of Esoteric's Monoblock M1. It is hand-assembled in Tokyo by the high-end brand of Japan's TEAC Corporation. Its output stage uses large bipolar LAPT transistors, and the design aims at a very low output impedance and a damping factor of 1,000.
Key specs that matter
Rated output power is 145 W + 145 W into 8 ohms and 290 W + 290 W into 4 ohms, and maximum output power is 580 W + 580 W into 2 ohms. Frequency response is 5 Hz - 100 kHz (+0 dB, -3 dB, 8 ohms). S/N ratio is 115 dB (IHF-A), total harmonic distortion is 0.003% (1 kHz, 8 ohms, 145 W), and gain is 28.5 dB. Inputs are one XLR pair (44k ohms) and one RCA pair (22k ohms). Power consumption is 440 W, or 160 W with no signal. External dimensions are 445 x 221.5 x 489.6 mm (W x H x D, including protrusions), and weight is 48 kg.
Engineering and use context
A custom EI-type power transformer with a 940 VA core has separate windings for the left and right channels and is mounted on a 5 mm steel base plate. Each channel has three 4,700 µF capacitors in parallel. Heavy-duty power cables with crimp terminals are bolted together to lower impedance. A dedicated supply with its own toroidal transformer powers the voltage amplification stage, isolated from current fluctuations in the drive stage.
Signals enter through discrete balanced input buffer amplifiers and reach the amplification stage over a balanced low-impedance path. LAPT (Linear Amplified Power Transistor) devices are twice the size of commonly used power transistors and are rated for 17 A continuous and 34 A instantaneous peak current. In the power amplifier module they form a three-stage Darlington circuit with five parallel push-pull sections. Esoteric's LIDSC (Low Impedance Drive Stage Coupling) circuit lowers the output impedance from the second drive stage to the final stage and increases current supply capability.
For a lower output impedance, nine bus bars are used per channel and the output coil is omitted. A simplified circuit with lower gain in the preceding stage reduces the amount of negative feedback. Input connectors and loudspeaker terminals are from WBT. Inside the dual-level chassis a 2 mm sheet steel framework divides the circuit blocks into compartments on a 5 mm steel base, enclosed by thick aluminium panels and supported by four pinpoint feet.
Pairing
A balanced preamplifier output connects to the XLR input. The matching Esoteric stereo preamplifier is the C-02X.
Alternatives
The S-05 is the more compact Esoteric stereo power amplifier from the 05 series.