The H20 is a dual-mono stereo power amplifier from Hegel, the Oslo company Bent Holter founded in 1988. Its core design is based on the H30 reference amplifier, and it uses Hegel's patented, laser-trimmed SoundEngine modules together with the latest version of the company's FET technology. A single button on the bead-blasted, anodised front panel is the only control.
Key specs that matter
Output power is more than 200 W + 200 W into 8 ohms (1 kHz, 1% THD), and Hegel quotes a current capability of more than 130 A. Frequency response is within ±0.2 dB from 20 Hz to 20 kHz, with phase deviation below 2 degrees over the same range. Signal-to-noise ratio is above 100 dB, and crosstalk is below -100 dB. Distortion is less than 0.006% at 100 W into 8 ohms, and intermodulation is less than 0.01% (19 kHz + 20 kHz). Damping factor is more than 1000. Inputs are RCA unbalanced (50 kohm) and XLR balanced (10 kohm). Power consumption is 60 W at idle. Dimensions are 145 x 430 x 370 mm (H x W x D), and weight is 18 kg.
Engineering and use context
SoundEngine is Hegel's local error-cancelling system. It cancels the crossover distortion found in class AB amplifiers and uses local, adaptive feedforward rather than global negative feedback. With DualAmp, the voltage gain stage and the current gain stage are two separate stages, and there is no feedback from the current stage back to the voltage stage. DualPower gives the input and voltage gain stages a supply of their own, separate from that of the output stages, through separate windings on the power transformer.
Its power supply is a 1000 VA dual-mono design with 90,000 µF of capacitance. The output stage uses 20 high-speed bipolar transistors, each rated at 15 A and 200 W. For the speaker connection there are two pairs of heavy-duty gold-plated terminals.
Hegel puts well over 1.5 kg of aluminium in the front panel alone. The top and side covers have the same bead-blasted, anodised finish, and black is the only colour.
Pairing
A preamplifier, or a DAC or streamer with variable output, is required. The matching Hegel preamplifier is the P30A, connected through the balanced XLR inputs. Two pairs of terminals on the H20 allow bi-wiring.
Alternatives
The H30A is Hegel's larger stereo power amplifier, which can also run bridged as a mono amplifier.