Hifiverse

Endstufen Stereo - Wavac Audio Lab EC-300B

Beschreibung, Bilder, technische Daten und Spezifikationen

Wavac Audio Lab EC-300B
Bildquelle - (c) Wavac Audio Lab

The EC-300B is a stereo single-ended power amplifier from WAVAC Audio Lab of Yonezawa, Japan, rated at 10 W + 10 W in class A with a pair of 300B power triodes. It was designed by Nobu Shishido and is a special adaptation of WAVAC's proprietary IITC (Inverted Interstage Transformer Coupling) circuit. In the US it sold for USD 24,000, later raised to USD 24,490 because of higher production and shipping costs.

Key specs that matter

Effective power output is 10 W per channel, and load impedance is 8 ohms with 4 and 16 ohm taps. Frequency range is 20 Hz - 100 kHz. Input sensitivity is 1.0 V rms, input impedance is 100 kohms and S/N ratio is 80 dB. Power consumption is 260 W, and mains voltage is 100, 110, 120, 220, 230 or 240 V at 50-60 Hz, selected when shipped. External dimensions are 485 x 220 x 350 mm (W x H x D), and weight is 27 kg.

Engineering and use context

Its input tube is a triode-wired Western Electric 435A, a small-signal device designed for telecommunication applications. In this amplifier WAVAC's IITC concept uses a configuration that cancels DC magnetisation in the interstage transformer. All circuitry is direct-coupled, without coupling capacitors. According to WAVAC, the 300B heaters are supplied from a well-filtered DC source to minimise hum and noise, and a power line input filter reduces noise from the mains supply. Every transformer is custom-wound for WAVAC by TANGO of Japan.

A 10 mm thick chassis is NC machined from solid aluminium and has a satiny champagne-gold finish, with a perforated aluminium bottom plate for cooling. Tube sockets are machined from solid Teflon, carry gold-plated phosphor bronze contacts and are mounted on elastomeric vibration insulators. Over the output tubes sits a laboratory glass canopy suspended on elastomer supports. Gold-plated speaker jacks that accept heavy speaker cables are mounted on the top of the amplifier.

Pairing

A high-sensitivity loudspeaker is required. The output taps allow 4, 8 or 16 ohm loudspeakers. A preamplifier with variable output is required.

Alternatives

The WAVAC MD-300B is another single-ended 300B power amplifier in the WAVAC range.

Spezifikationen

  • Modellbezeichnung

    EC-300B

  • Eingangsempfindlichkeit (mV)

    1000

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    10 + 10

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    80

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    260

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    485 x 350 x 220

  • Gewicht (kg)

    27

  • Offizieller Link