Hifiverse

Endstufen Stereo - European Audio Team (EAT) E-GLO I

Beschreibung, Bilder, technische Daten und Spezifikationen

European Audio Team (EAT) E-GLO I
Bildquelle - (c) European Audio Team (EAT)

The E-Glo I is an all-tube integrated amplifier from European Audio Team, better known as E.A.T. for its turntables, tonearms and phono stages. It was the first amplifier from the brand and is the only model on its amplifier page. E.A.T. describes a new topology that operates in pure class A, with KT88 output tubes from Electro-Harmonix or from E.A.T. itself. The US price is about USD 9,995, and the E-Glo S tube phono stage belongs to the same family of E.A.T. electronics.

Key specs that matter

Output power is 2 x 35 W into 4 or 8 ohms in ultralinear mode and 2 x 18 W into 4 or 8 ohms in triode mode. Its tube complement is one 12AX7, two 12AT7 and four KT88. Five RCA line inputs have gold-plated connectors, 500 mV input sensitivity and 30 kOhm input impedance. Frequency range is 10 Hz - 50 kHz (±0.5 dB, 5 W). Harmonic distortion is below 0.05% (1 kHz, 5 W), and signal-to-noise ratio is above 95 dB. Mains supply is 230 V/50 Hz with a rating of 375 VA. Dimensions are 435 x 170 x 485 mm (W x H x D), and weight is 26 kg.

Engineering and use context

Each KT88 runs with automatic bias and cathode feedback. Triode and ultralinear operation are selected with an instant switch. E.A.T. combines printed circuit boards with what it calls wire-to-wire connection quality, and high-quality capacitors are used in all stages.

Volume is set by a relay attenuator with two independent blocks for each channel, a layout that E.A.T. credits with improved channel separation. It works in 1 dB steps over 63 dB of attenuation, and the signal passes through as few contacts as possible. According to E.A.T., the deviation between left and right channels of the attenuator stays below 0.05 dB.

Both output transformers have several bifilar windings arranged in sections to maximise power bandwidth, and the brand lists them as ultra-wide-bandwidth transformers. Real wood side panels, for example in black or Macassar, frame the casing. A remote control is supplied.

Pairing

Loudspeakers with a nominal impedance of 4 or 8 ohms are required. Sources connect at line level, and a turntable needs an external phono stage such as the E.A.T. E-Glo S.

Alternatives

European Audio Team has no other integrated amplifier in its range.

Spezifikationen

  • Modellbezeichnung

    E-GLO I

  • Eingangsempfindlichkeit (mV)

    500

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    30 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 35

  • Ausgangsleistung (4Ω) (W)

    2 x 35

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Signal-Rausch-Abstand (dB)

    >95

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    < 0,05

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    435 × 170 × 485

  • Gewicht (kg)

    26

  • Offizieller Link