Hifiverse

Endstufen Stereo - Aries Cerat Diana Forte

Beschreibung, Bilder, technische Daten und Spezifikationen

Aries Cerat Diana Forte
Bildquelle - (c) Aries Cerat

The Diana Forte is a single-ended triode (SET) stereo power amplifier from Aries Cerat of Cyprus. Introduced in 2015, it is based on the company's legacy Diana Integrated and launched in the US at around USD 27,500. Aries Cerat positions it as the bridge between its Concero 25 and Concero 65 monoblocks and as a compact stereo version of the Concero 65 Reference. In its redesigned high-gain version it is designed to operate with any high-quality preamplifier.

Key specs that matter

Output power is 60 W per channel in single-ended class A (70 W peak), and gain is 21 dB. Each channel has two Elrog 845 output tubes and one Siemens E280F driver, for a total of four 845s and two E280Fs. Noise floor is below -100 dB (unweighted), and distortion is -40 dB H2 at 50 W. Full power bandwidth is -5 dB at 8 Hz and -3 dB at 70 kHz. The power supply has a 1,800 VA power transformer and 2000 J of energy storage. Inputs are RCA and the proprietary AC link input. Output impedance is user selectable at 2, 1.1 or 0.5 ohms. Power consumption is 500 W. Dimensions are 570 x 590 x 360 mm (W x D x H), and weight is 110 kg.

Engineering and use context

Both the output and driver stages derive from the Diana Integrated, with the output stage scaled up to deliver over twice the power. Its parallel SET output stage uses the 845 directly heated triode and drives an oversized-core output transformer, built with special winding techniques for wide bandwidth at full power. The Elrog 845 is a current-production tube made in Germany. A double C-core, bifilar-wound interstage transformer loads the 845 stage.

All stages are coupled with Aries Cerat's AC link method of coupling, and there are no capacitors in the signal path. Through the AC link input the amplifier connects to an accompanying Aries Cerat preamplifier.

Power for the output stage comes from a dual array of completely separate choke-filtered capacitor banks built with the company's Super-capacitors. These special-purpose film capacitors have ESL and ESR values 100 times lower than other film or electrolytic capacitors, with an ESR of 1 milliohm. The driver stage also uses choke-filtered capacitor banks, with its own separate power transformer to avoid crosstalk between supplies. All four filament supplies and both heater supplies are triple filtered.

Every tube can be biased and monitored on the fly with the built-in meters, which also check tubes for matching as a stripped-down tube matcher.

Pairing

A preamplifier with an RCA output is required. With an Aries Cerat AC link preamplifier the AC link input is used. The output impedance setting is chosen to suit the loudspeaker load.

Alternatives

Aries Cerat has no other stereo power amplifier in its current range.

Spezifikationen

  • Modellbezeichnung

    Diana Forte

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    60

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    21

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    600 x 590 x 360

  • Gewicht (kg)

    110

  • Offizieller Link

Weitere Komponenten