Hifiverse

Endstufen Stereo - Manunta Audio Classic Power Amplifier

Beschreibung, Bilder, technische Daten und Spezifikationen

Manunta Audio Classic Power Amplifier
Bildquelle - (c) Manunta Audio

The Classic Power Amplifier is the stereo power stage of the analogue Classic series from Manunta by M2Tech, the brand under which the Pisa company sells its hand-built Italian electronics. It was presented together with the Classic Preamplifier as the separates that sit beside the earlier Classic Integrated Amplifier, with front-panel styling taken from hi-fi components of the 1980s and 1990s. M2Tech aims it at demanding loudspeakers and difficult loads.

Key specs that matter

Continuous power before clipping is 75 W per channel into 8 ohm and 110 W into 4 ohm. For 10 ms peaks the figures rise to 170 W into 8 ohm and 260 W into 4 ohm, giving a dynamic headroom of 3.6 dB. Full output needs 1.6 V at either input. Input impedance is 47 kOhm on RCA and 20 kOhm on XLR, while the signal-to-noise ratio reaches 108 dBA and THD+N is 0.02%, both measured at 1 kHz and full rated output into 8 ohm. The case measures 420 mm in width, 313 mm in depth and 120 mm in height, and weighs 15 kg net.

Engineering and use context

Inside, a dual-mono supply gives each channel its own mains transformer. No electronic protection circuits are used. An oversized output stage and thermal sensors guard the output transistors against overheating instead. A rear-panel switch selects between the RCA socket and the XLR socket, and a single set of binding posts serves the speakers. Two 3.5 mm trigger sockets accept 9-15 V and pass the command through, so a preamplifier can switch the amplifier on and the second socket can wake another device. Two VU meters calibrated in dB and in watts into 8 ohm show the instantaneous power and make clipping visible. Their brightness is set through an infrared receiver with any Manunta remote, which can be ordered separately. The chassis is rack-mountable, assembly is done by hand in Italy with through-hole parts only, and the unit draws 315 VA from 110-130 V or 220-240 V mains.

Pairing

The natural partner is the Classic Preamplifier, whose trigger output and balanced connection match this amplifier, but any line preamplifier able to deliver the full drive level works, and the Classic DAC/renderer completes a digital front end for the same stack. Speakers whose impedance falls to 4 ohm stay within its rated range, and the meters let the owner see how close a given pair of speakers pushes it to its limit.

Alternatives

The Manunta Crosby is a compact Class D stereo power amplifier from the Rockstars series that can be bridged to mono.

Spezifikationen

  • Modellbezeichnung

    Classic Power Amplifier

  • Eingangsempfindlichkeit (mV)

    1600

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    108

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    0.02

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    420 x 313 x 120

  • Gewicht (kg)

    15

  • Offizieller Link