Hifiverse

Endstufen Stereo - NAD CI 16-60 DSP

Beschreibung, Bilder, technische Daten und Spezifikationen

NAD CI 16-60 DSP
Bildquelle - (c) NAD

The CI 16-60 DSP is a 16-channel amplifier from NAD's Custom Install series, intended for distributed audio in homes and commercial buildings. NAD announced it in Pickering, Ontario, on 18 January 2021, with availability from mid-February at USD 2,499 MSRP, or GBP 1,999 in the UK. It is now listed in NAD's archive, and a CI 16-60 DSP V2 has replaced it.

Key specs that matter

Continuous output power is 60 W per channel into 8 ohms and 65 W into 4 ohms (all channels driven, 1 kHz, 0.05% THD). Bridged, each channel pair gives 140 W into 8 ohms under the same conditions. Clipping power is 60 W (1 kHz, 8 ohms, 1% THD), or 150 W bridged. IHF dynamic power into 8 ohms is 65 W with all channels driven and 70 W with two channels driven, rising to 270 W and 280 W in bridged mode. Peak output current is 15 A (1 ohm, 1 ms), and damping factor is 110 (20 Hz - 1 kHz, 8 ohms). THD is 0.05% (20 Hz - 3 kHz, 1 W to 50 W, 8 and 4 ohms). Signal-to-noise ratio is 80 dB (A-weighted, 500 mV input, ref. 1 W into 8 ohms), frequency response is ±1 dB (20 Hz - 20 kHz), and channel separation is 60 dB (1 kHz). Input sensitivity is 760 mV for 50 W into 8 ohms, maximum undistorted input level is 2900 mV, and input impedance is 20 kohms // 220 pF. Standby power is 0.5 W. Dimensions are 483 x 100 x 435 mm (W x H x D), with a net weight of 10.3 kg.

Engineering and use context

NAD uses its HybridDigital amplifier platform here with a customised version of the Hypex UcD output stage, all in a 2U rack-mount chassis. According to NAD, the unit is designed for continuous operation in professional environments. Multichannel DSP provides equalisation control. A virtual patch bay routes any input to any one or several outputs without physical connections. Every input has loop-through jacks.

Configuration and calibration are done by the installer through a web-based user interface, and the amplifier is IP-controlled. That interface also reports temperature and power status and offers power cycling, factory reset and firmware updating. Each input has an audio sense function with a threshold of 3 ± 0.5 mV. For automation there is a 12 V trigger input that accepts 3 - 30 V DC, plus IR in and out.

Pairing

Line-level sources such as streamers or matrix switchers are required at the inputs. Each channel drives one loudspeaker of 4 ohms or higher, and bridged pairs drive one 8 ohm loudspeaker.

Alternatives

The NAD CI 8-150 DSP is an eight-channel installation amplifier from the same series, rated at 150 W per channel into 8 ohms.

Spezifikationen

  • Modellbezeichnung

    CI 16-60 DSP

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    60

  • Ausgangsleistung (4Ω) (W)

    105

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    80

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0.05

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    110

  • Abmessungen (mm)

    483 x 100 x 435

  • Gewicht (kg)

    10.3

  • Offizieller Link

Weitere Komponenten