Hifiverse

Endstufen Stereo - Roksan Caspian 4G Power Amplifier

Beschreibung, Bilder, technische Daten und Spezifikationen

Roksan Caspian 4G Power Amplifier
Bildquelle - (c) Roksan

The Caspian 4G Power Amplifier is a stereo power amplifier from Roksan, hand-built at the Monitor Audio Group headquarters in Rayleigh, Essex. It went on sale in January 2026 together with the Caspian 4G Streaming Pre-Amplifier, which brought the Caspian Series 4G to four components. Prices are GBP 3,000, USD 3,750 or EUR 3,500 per unit, and the pre and power system costs GBP 6,500, USD 8,250 or EUR 7,500.

Key specs that matter

Rated output is 105 W into 8 ohms and 200 W into 4 ohms (235 V AC, 1% THD, both channels driven). Mono-bridged, it gives 420 W into 8 ohms and 630 W into 4 ohms. THD+N is below 0.007% (1 W, 1 kHz, both channels driven), gain is 29 dB and signal-to-noise ratio is above 85 dB (1 W into 8 ohms). Frequency linearity is ±0.25 dB from 20 Hz to 20 kHz. Inputs are two RCA pairs and one balanced XLR pair, and two RCA line-level outputs are provided. Maximum input level in stereo is 1.1 Vrms on RCA and 2.2 Vrms on XLR. Dimensions are 93 x 432 x 378 mm (H x W x D) and weight is 14.9 kg.

Engineering and use context

Inside is a dual mono Euphoria amplifier operating in class AB. Roksan has evolved this AB topology with individual power supplies for the current and voltage amplifiers to reduce interaction between them. Both stages were also examined for soft-clip behaviour, which the company tuned in listening sessions to reach maximum SPL before audible degradation. The power supply is rated at 600 VA with 36,400 µF per rail, and maximum consumption is 610 VA with 0.5 W in standby.

Each unit can run in stereo or as a bridged monoblock, and a system can be built from a single stereo amplifier up to a dual monoblock configuration. In mono mode the maximum input level rises to 2.2 Vrms on RCA and 4.2 Vrms on XLR. The front and top cover are extruded and machined aluminium, with extruded aluminium heatsinks. On the unit there is only a power button. Setup runs through the MaestroUnite app, which also installs firmware updates over a configured Wi-Fi connection, and the rear panel adds a 12 V trigger and a wired IR input. Finishes are silver and black, with a five-year warranty.

Pairing

The matching preamplifier is the Caspian 4G Streaming Pre-Amplifier, and the two connect over fully balanced XLR. Any preamplifier with RCA or XLR outputs can drive it. Loudspeakers of 4 ohms or 8 ohms nominal impedance are within its rating.

Alternatives

The Roksan Caspian Stereo Power Amplifier from the earlier Caspian M Series is an older two-channel power amplifier.

Spezifikationen

  • Modellbezeichnung

    Caspian 4G Power Amplifier

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    105

  • Ausgangsleistung (4Ω) (W)

    200

  • Verstärkung (dBu)

    29

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    >85

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    <0.007

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    93 x 432 x 378

  • Gewicht (kg)

    14.9

  • Offizieller Link