Hifiverse

Endstufen Stereo - Ayon Audio Ayon Crossfire EVO PA

Beschreibung, Bilder, technische Daten und Spezifikationen

Ayon Audio Ayon Crossfire EVO PA
Bildquelle - (c) Ayon Audio

The Crossfire EVO PA is a single-ended stereo power amplifier from Ayon Audio and the power amplifier version of the Crossfire Evo Integrated. It uses a completely redesigned EVO generation power supply, a tube regulator and new amplification and driver circuitry, and its gain stages were optimised for the shortest signal path. Ayon lists it among its EVO stereo amplifiers alongside the Triton Evo PA and the Crossfire Evo Delta PA.

Key specs that matter

Class of operation is single-ended, pure class A. Its tube complement is two AA62B, a directly heated triode that Ayon manufactures itself and bases on the WE 300B. Output power is 2 x 30 W into 4 or 8 ohm loads. Frequency response is 8 Hz - 35 kHz (0 dB), input impedance is 100 kohm at 1 kHz, and S/N ratio at full power is 98 dB. Negative feedback is 0 dB. There is no volume control and no remote control, and inputs are 1 x RCA and 1 x XLR. Dimensions are 520 x 420 x 250 mm (W x D x H), weight is 45 kg, and shipping weight is 55 kg.

Engineering and use context

Two separate low-noise insulated power transformers are used, encased, damped and RFI/EMI shielded, and separate transformers, chokes and filters isolate the input stage from the output stage. A dual choke filtered supply powers the AA62B tubes, while the pre and driver stage has a dual choke of its own. Regulation of the tube supply uses a 5U4G. Each stage of amplification has a separate, isolated supply, and filament supplies are regulated DC with soft start. An AC power line filter, high capacitance energy storage and current in-rush limiting are included, and the auto-sequenced power-on cycle completes in 1 minute.

No solid-state devices, followers or buffers sit in the signal path, and wiring is minimal and discrete. Its bias system is auto-fixed, with an analogue meter on a mV scale. Ayon makes the super-wide bandwidth output transformers, which use multiple tight layering and are sealed with an anti-resonance compound. Grounding is a switchable dual system with a central one-point star earth. Tube sockets with beryllium-copper spring pins are custom made by Ayon. The brushed anodised, non-magnetic aluminium chassis is hand assembled, stands on resonance-absorbing aluminium feet and comes in black or chrome.

Pairing

A preamplifier with RCA or balanced XLR outputs is required. Ayon rates the amplifier also for more difficult loudspeaker loads.

Alternatives

The Ayon Crossfire EVO Delta PA is a stereo power amplifier with four AA62B tubes and 2 x 50 W.

Spezifikationen

  • Modellbezeichnung

    Ayon Crossfire EVO PA

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 30

  • Ausgangsleistung (4Ω) (W)

    2 x 30

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    8

  • Obere Grenzfrequenz +/- 3dB (Hz)

    35 000

  • Signal-Rausch-Abstand (dB)

    98

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    520 x 420 x 250

  • Gewicht (kg)

    45

  • Offizieller Link