Hifiverse

Endstufen Stereo - Electrocompaniet AW250 R

Beschreibung, Bilder, technische Daten und Spezifikationen

Electrocompaniet AW250 R
Bildquelle - (c) Electrocompaniet

The AW250 R is a balanced stereo power amplifier from Electrocompaniet of Tau, Norway, with a dual-mono layout and an FTT (Floating Transformer Technology) power supply. Electrocompaniet states that every unit is produced in Norway, including the parts and components. Its full name on the front panel is Ampliwire AW 250R. In Europe it has been sold at around EUR 9,600.

Key specs that matter

Rated output power is 2 x 250 W into 8 ohms, 2 x 380 W into 4 ohms, 2 x 625 W into 2 ohms and 2 x 1100 W into 1 ohm. Output impedance is below 0.008 ohms (20 Hz - 20 kHz), and maximum peak current is above 100 A. THD is below 0.001% at 1 kHz, both at half power and at -1 dB. Noise with both inputs shorted is 90 µV (400 Hz - 30 kHz) and 100 µV (10 Hz - 30 kHz). XLR input impedance is 110 kohms, and input sensitivity for rated output is 1 V on the product page and 1.65 V in the owner's manual. Power consumption with no load or signal is 230 W. Each unit measures 483 x 450 x 210 mm (W x D x H) and weighs 39 kg.

Engineering and use context

According to Electrocompaniet, the FTT power supply can deliver twice the current of conventional power supply designs. The amplifier runs at a high class A operating point, and the chassis heats up in operation and needs free air at the sides, above and below. Speakers are connected 5 seconds after switch-on, and this delay prevents turn-on transients at the speaker outputs.

On the rear panel, each channel has one female XLR input and one male XLR LINK socket. The LINK socket is intended for bi-amping or for connection of an active subwoofer. Double sets of speaker terminals per channel allow bi-wiring. In bridged mode the AW250 R delivers up to four times the power, and the manual states that it must not be loaded below 4 ohms in mono mode. Rated output changes by about 20% with a 10% change in line voltage. In the box are the amplifier, an AC power cord, the owner's manual and a spare fuse.

Pairing

A preamplifier with balanced XLR outputs is required. RCA sources need the ECP5XLR RCA-to-XLR adapter, sold separately. The matching preamplifier in the current range is the EC 4.8 MKII.

Alternatives

The AW250 R is the only stereo power amplifier in the current Electrocompaniet range, where the AW180, AW400 and NEMO AW600 are monoblocks.

Spezifikationen

  • Modellbezeichnung

    AW250 R

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    110 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    < 0.008

  • Maximaler Strom (A)

    > 100

  • Ausgangsleistung (8Ω) (W)

    2 x 250

  • Ausgangsleistung (4Ω) (W)

    2 x 380

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    < 0,001

  • Maximale Leistungsaufnahme (W)

    230

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    483 × 450 × 210

  • Gewicht (kg)

    39

  • Offizieller Link