Hifiverse

Endstufen Stereo - Line Magnetic Audio AS-135

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio AS-135
Bildquelle - (c) Line Magnetic Audio

The AS-135 is a low-power single-ended class A tube amplifier from Line Magnetic Audio of Foshan, China, sold under its Analog Sound label. Line Magnetic describes it as the first model of that series built as both an integrated amplifier and a pure power amplifier at low output, and as its most cost-effective entry to a Western Electric style circuit. Its lower-rated sibling is the AS-134, and an SG Series 2.0 edition of the AS-135 has also been offered.

Key specs that matter

Rated output is 7 W RMS per channel from directly heated triodes, and either 300B or 2A3 output tubes can be used. Output taps are provided for 4, 8 and 16 ohms. Sensitivity is 250 mV and input impedance is 100 kohms / 600 ohms. Frequency response is 20 Hz - 30 kHz (±2 dB). Signal-to-noise ratio is 87 dB, measured with AC heating on the output tube filaments, and THD is 1%. Dimensions are 480 x 255 x 470 mm, and weight is about 37 kg. Mains supply is 115 - 230 V, 50 Hz (±5%), with a current draw of 0.5 A at 220 V.

Engineering and use context

A tube rectifier, the 5Z4 or its equivalent 5Y3, provides the high-voltage supply in place of silicon diodes. Independent power supplies serve the high-voltage rail and the secondary high-voltage rail. According to Line Magnetic, the layout follows the structure of the Western Electric WE12 amplifier line.

Both 300B and 2A3 triodes can be installed in one chassis, and Line Magnetic says the circuit was designed for the strengths and limits of each type. In integrated mode the AS-135 works as a complete amplifier with no preamplifier. Switched to pure power amplifier operation, it accepts a separate line stage ahead of it.

Pairing

High-efficiency loudspeakers, such as horn-loaded designs or large full-range drivers, are required. The output taps allow matching to the nominal impedance of the speaker. In power amplifier mode the matching preamplifier is the Analog Sound AS-133.

Alternatives

The Line Magnetic LM-300IA is a single-ended class A integrated amplifier with 300B output tubes, rated at 10 W per channel and also usable as a power amplifier.

Spezifikationen

  • Modellbezeichnung

    AS-135

  • Eingangsempfindlichkeit (mV)

    250

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 х 7

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Signal-Rausch-Abstand (dB)

    87

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    1

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 x 255 x 470

  • Gewicht (kg)

    37

  • Offizieller Link