Hifiverse

Endstufen Stereo - Eversolo AMP-F8

Beschreibung, Bilder, technische Daten und Spezifikationen

Eversolo AMP-F8
Bildquelle - (c) Eversolo

The AMP-F8 is a Class AB stereo power amplifier from Eversolo, the Chinese maker of the DMP network players. Eversolo presented it in August 2026 as a partner for the DMP-A8 Gen 2, with shipments planned for September 2026. List price is USD 1,800 in the US and EUR 1,800 in Europe.

Key specs that matter

Continuous output power is 180 W RMS per channel into 8 ohms and 280 W RMS per channel into 4 ohms in stereo mode, and 500 W RMS into 8 ohms in bridged mode. THD+N is 0.003% (1 kHz), and SNR is 115 dB or better (A-weighted). Damping factor is above 400 (8 ohms, 1 kHz). Frequency response is 10 Hz - 30 kHz (±0.5 dB, 1 W/8 ohms), and channel crosstalk is -95 dB or better (180 W/8 ohms, 1 kHz). Inputs are one balanced XLR and one unbalanced RCA, each with 10 kOhm input impedance. Two gain settings are offered, 23 dB and 29 dB. Input sensitivity for 180 W into 8 ohms is 5.2 V (XLR) and 2.65 V (RCA) at 23 dB gain, or 2.6 V and 1.3 V at 29 dB gain. Dimensions are 388 x 265 x 119 mm (W x D x H, including feet), and net weight is 15.9 kg. Without the feet the case is 109 mm high, and the packed weight is 18.6 kg.

Engineering and use context

Each channel uses three pairs of precision-matched high-current BJT power transistors in a parallel configuration, and Eversolo states that this arrangement gives a more even current distribution. Power comes from a custom 800 W toroidal linear power supply with independent supply sections for the left and right channels. Its filter capacitor array consists of 24 custom audio-grade filter capacitors. A DC blocking circuit suppresses the effect of DC offset in the AC mains on the toroidal transformer.

For low-level signals the AMP-F8 uses a dual differential amplification architecture with symmetrical circuitry and precision negative feedback. Its chassis is CNC-machined from aluminium and has an anodised, sandblasted finish, and analogue VU meters sit on the front panel. Mains voltage is 100-120 V at 60 Hz or 220-240 V at 50 Hz, and maximum power consumption is 1200 W. Supplied accessories are a power cable, a trigger cable and a user manual.

Pairing

A preamplifier, DAC or network player with variable XLR or RCA outputs is required. The matching source is the Eversolo DMP-A8 Gen 2. Bridged mode allows two AMP-F8 units to be used as monoblocks, one per speaker.

Alternatives

The AMP-F2 is the smaller Class D stereo power amplifier in the Eversolo Amplifier Series.

Spezifikationen

  • Modellbezeichnung

    AMP-F8

  • Eingangsempfindlichkeit (mV)

    5200 (XLR), 2650 (RCA)

  • Eingangsimpedanz (symmetrisch) (Ω)

    10 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    10 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    180

  • Ausgangsleistung (4Ω) (W)

    280

  • Verstärkung (dBu)

    23

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Signal-Rausch-Abstand (dB)

    ≥115

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0,003

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    >400

  • Abmessungen (mm)

    265 x 388 x 119

  • Gewicht (kg)

    15.9

  • Offizieller Link

Weitere Komponenten